Search

1 to 7 of 7
Sort by

Discussion Post
SRX240 cluster with LACP through a Cisco switch

Hi everyone! I would like to ask for some help. We are trying to put together 2 SRX240 firewalls in a cluster with a Cisco switch between them and with LACP between them on the reth interfaces. The control and the fabric link won't work through the switch only when we connect them...



Blog Entry
Expert Advice: What are the different packet classification methods? Which method is recommended for complex and large networks?

Question The following article was created from our online Tech Cafe event with Miguel Barreiros on QoS-enabled Networks. What are different packet classification methods? Which method is recommended for complex and large networks? Answer There are two types of packet...



Discussion Post
BGP Aggregate and Non-Aggregate Routes Advertised to BGP Peer in a Routing-Instance

Hello Juniper Routing Experts! I need to aggregate routes to a peer on a routing instance. I can't seem to find a configuration example that works with a routing instance and all my efforts result in no routes advertised. Please reference the diagram below. Based on what I gathered from THIS...


Discussion Post
Advertsing an Aggregate Route

Hi, This is a simple advertisement of an aggregate route between two routers. Router3 is advertising the aggregate via BGP to Router2. I see that Router2 is receiving the route from Router3 but it's hidden it. When I check why it states that it's "looped". However, I don't see how...