Hi all, Starting out with bgp fundamentals. I have a 2 router topology and am trying to establish an iBGP session between them: -- R0 --xe-/4/1/18---xe-3/0/0-- R1 -- R0: === show protocols bgp ( group ibgp ( type internal; local-address 1.1.1.1; neighbor 2.2.2.2; ) ) ...
Hi all, on my juniper ex4300 is receive routes with tag 666 end i don't want do redisribute them. so i have: set policy-options policy-statement export-to-ospf term tag666 from tag 666 set policy-options policy-statement export-to-ospf term tag666 then reject ...
Hi Nellikka, i have done the changes that you have mentioned below , but still it is not working . Please find below results set security ipsec vpn vpn01-DUB-Three establish-tunnels immediately--Configured set security ipsec vpn vpn01-DUB-Three ike proxy-identity local 2.2.2.2...
Hi Nellikka Thanks for your quick responce. i have done the changes that you have mentioned below. but still it is not working . please find latest configuration and debug traces for IKE > Remove aggressive mode config-- Removed > Remove PFS config from SRX side...
HI Team, i'm new with ipsec, trying to setup a IPSEC vpn between fortinet and SRX but it is not working . i have captured the packet and found that SRX is not initiating ike communication. configuration and topo is as below. phase 1 is no comming up. Please help set system...
Hi , As per the documet JUNOS checks the vpnv4 routes against the vrf import policies. If the vpnv4 route matches one of the policies, it is added to the bgp.l3vpn.0 routing table otherwise it will not show in the bgp.l3vpn.0 routing table. bgp.l3vpn.0 — To determine whether to...
HI Team, i'm running ospf as PE(Juniper)-CE(Cisco) protocol and trying to import routes learned from MP-BGP into ospf but it is not working . routing-instances ( A ( instance-type vrf; interface em2.0; route-distinguisher 100:1; vrf-import import to A; vrf-export export to PE4; vrf...