Log in to ask questions, share your expertise, or stay connected to content you value. Don’t have a login? Learn how to become a member.
The following example shows how to configure conditional route advertisement on an SRX Series device. In this example, the SRX Series device must advertise the route 1.1.1.0/24 to AS1111 if the route 192.168.1.0/24 exists on the SRX Series device that is advertised from the IBGP neighbor. Additionally, the SRX Series device uses a NAT 1.1.1.1 to 192.168.1.1 to make a Web Application available publicly
1 Comment - So when AS1111 sends traffic to SRX, it would still be delivered because it will be static natted to 192.x.x.x, so the discard would not matter in this case!!
Question Which EX Series Switches are supported with the J-Web distribution model?
To ramp up on MPLS for EX Series switches, click Junos OS MPLS for EX Series . This article provides answers to the most common questions about MPLS support on EX Series switches using Junos OS
Answer Currently, the SRX Series devices support high availability (HA) for PKI certificates
1 Comment - no search term matches found in comments.
Junos Continuity software is currently supported on the MX240, MX480, MX960, and MX2000 Series 3D Universal Edge Routers
To review performance, scalability, and power efficiency validation for the MX Series 3D routers with the Junos Trio chipset, see: EANTC testing validation This article provides answers to the most common questions about the Junos Trio chipset on MX Series routers used with Junos OS Release 10.1 and later
See matching posts in thread - connecting J-series to cisco fr...
Juniper Networks EX Series switches are shipped with the Juniper Networks Junos operating system (Junos OS) installed
Question What MPLS features do the EX Series switches support?...For more information, click Understanding Software Licenses for EX Series Switches
To ramp up on DPC overview information, click: MX Series Interface Module Reference This article provides answers to the most common questions about DPCs on MX Series routers. How many Layer 3 and Layer 2 policers are supported on Juniper Networks MX Series devices? Are peak information rate (PIR) and committed information rate (CIR) supported at the queue level on MX Series devices?