Junos OS

Effective April 2, 2025, Juniper will no longer accept cases for Junos v17.x, and effective Oct 1, 2025, Juniper will no longer accept cases for Junos v18.x and 19.x. *Effective December 31, 2025, Juniper will no longer accept software support cases ...

This is the final post in the #JumpstartJSI series. Special thanks to @Devin and @pgoddard for their contributions. Below is a quick overview of the series: Why Connect to JSI Juniper Support Insights (JSI) extends support automation & ...

Hi. Comparing with the information in the article, it seems that the following four lines are missing. Have you set them? -- set interfaces em0 unit 0 family inet address 10.x.x.246/yy set system management-instance set routing-instances mgmt_junos ...

The article is, as you mentioned, not very clear. I have made a change request so it can be corrected. I guess the best way to determine the burst size you want is by trial and error as so many parameters can influence the behaviour. A calculated base ...

Hi, I have a QFX10002-36Q, and I configured sFlow with the following commands: set protocols sflow polling-interval 20 set protocols sflow sample-rate ingress 10000 set protocols sflow source-ip 10.x.x.246 set protocols sflow collector 172.x.x.210 set ...

Yes, we are recording the sessions. If the recording is not posted here, I will follow up with how you can access the recording. ------------------------------ Jodi Meier ------------------------------

I am interested in hearing about the JSI updates, but am unable to attend this session. Will it be recorded for later viewing, and if so, do I need to do anything to receive notification of the recording? Thanks.