Junos OS

Effective April 2, 2025, Juniper will no longer accept cases for Junos v17.x, and effective Oct 1, 2025, Juniper will no longer accept cases for Junos v18.x and 19.x. *Effective December 31, 2025, Juniper will no longer accept software support cases ...

This is the final post in the #JumpstartJSI series. Special thanks to @Devin and @pgoddard for their contributions. Below is a quick overview of the series: Why Connect to JSI Juniper Support Insights (JSI) extends support automation & ...

Hi, Did anyone here successfully configured a netflow monitoring for a logical systems for mx204? I found an unofficial article that it is not supported. If that turns out to be true, is there an alternative? Thank you ------------------------------ ...

This message was posted by a user wishing to remain anonymous Thank you for your response, I will try this first for snmp v2

This message was posted by a user wishing to remain anonymous Thank you for your response, I will try this first.

While focused on SNMPv3, a blog post I wrote describes the mechanism for monitoring logical systems and routing instances from NMSes. There's a note at the end about SNMP version 2c but I've not tested it. JunOS and SNMPv3 into VRFs and Logical Systems ...

From this kb article it seems you configure this by adding the logical system or routing instance into the configuration on the main SNMP stanza. https://supportportal.juniper.net/s/article/J-SRX-Junos-How-to-permit-SNMPv1-and-SNMPv2c-polling-for-an-interface-in-a-routing-instance-logical-system?language=en_US ...