Junos OS

Effective April 2, 2025, Juniper will no longer accept cases for Junos v17.x, and effective Oct 1, 2025, Juniper will no longer accept cases for Junos v18.x and 19.x. *Effective December 31, 2025, Juniper will no longer accept software support cases ...

This is the final post in the #JumpstartJSI series. Special thanks to @Devin and @pgoddard for their contributions. Below is a quick overview of the series: Why Connect to JSI Juniper Support Insights (JSI) extends support automation & ...

Hello, We are seeing a recurring subscriber-management issue on an MX204 running Junos 24.4R2-S4.11. The issue affects DHCP dual-stack subscribers. So far, every affected subscriber has IPv6 enabled on the CPE. The problem appears after multiple ...

Hello, We are seeing a recurring subscriber-management issue on an MX204 running Junos 24.4R2-S4.11 . The issue affects DHCP dual-stack subscribers. So far, every affected subscriber has IPv6 enabled on the CPE. The problem appears after multiple ...

I have one requirement, Like to block remote access application usage for LAN clients and allow some clients explicitly. I have an SRX firewall deployed that handles security. We have a license for appid-sig. So, there is one default-permit policy ...

$9 hashed passwords, we can basically decrypt and view the passwords. > request system decrypt password "hash_value" -> So , its not secure. $6 hashed passwords are one-way hashes and cannot be decrypted. Basically, we will see the hash value ...

So, in any network, a firewall will be a CPE (where Cx network ends) and the service provider network starts. Like Demarc for the SP network. We can avoid overwhelming the RE with NTP queries from all LAN clients. We can configure a firewall filter ...