Junos OS

Effective April 2, 2025, Juniper will no longer accept cases for Junos v17.x, and effective Oct 1, 2025, Juniper will no longer accept cases for Junos v18.x and 19.x. *Effective December 31, 2025, Juniper will no longer accept software support cases ...

This is the final post in the #JumpstartJSI series. Special thanks to @Devin and @pgoddard for their contributions. Below is a quick overview of the series: Why Connect to JSI Juniper Support Insights (JSI) extends support automation & ...

Ran a test in a small 3 router lab where I removed the passive on the loopback for one of the routers. There was no change in either the OSPF database or the routing table. The interface status did change from the state DRother to DR. ------------------------------ ...

I think you are probably missing something like: set system services dhcp-local-server group blah interface ge-0/0/1.0 I'm not sure what the system processes does, but I'm pretty sure it isn't setting up a dhcp server. Juniper's documentation ...

Hello, We are currently using Inter-Chassis Services Redundancy Daemon (SRD) between 2 MX480 using MS-MPC using feature services Stateful-Firewall, NAT, IDS, and IPSEC and using JunOS 21.2R3-S8.5. The MS-MPC-128G is going EOHE - End of Hardware Engineering ...

For a better overview, these are just the commands I can use. Usage: bootjuniperstage3 Load and execute the stage 3 bootloader => #help bootjuniperstage3 - Load and execute the stage 3 bootloader bootstage3 - Load and execute the stage 3 bootloader ...

This message was posted by a user wishing to remain anonymous Hello , I am currently experiencing an issue with my Juniper SRX300 device. Upon booting, I encounter errors related to the SPI stage 3 bootloader. Below are the details of the ...