Junos OS

Effective April 2, 2025, Juniper will no longer accept cases for Junos v17.x, and effective Oct 1, 2025, Juniper will no longer accept cases for Junos v18.x and 19.x. *Effective December 31, 2025, Juniper will no longer accept software support cases ...

This is the final post in the #JumpstartJSI series. Special thanks to @Devin and @pgoddard for their contributions. Below is a quick overview of the series: Why Connect to JSI Juniper Support Insights (JSI) extends support automation & ...

The following is a SLAX op-script that can execute some defined CLI commands and store the results to disk on-box. Only caveat that comes to mind with this is that since it is using the command RPC to execute the command on the device, and return the ...

I too have the same issue. SPI stage 1 bootloader (Build time: Apr 26 2020 - 21:42:44) U-Boot 2013.07-JNPR-3.9 (Build time: Apr 26 2020 - 21:42:45) Octeon unique ID: 08000400427ca59e0548 N0.LMC0 Configuration Completed: 4096 MB SRX_300 board revision ...

Hi, There are multiple ways to do it. if you wnat to extract information from multiple devices from a single linux host, following is the url where i have created a script which runs from a linux host to junos devices 1 by 1 and collects what ever ...

Good question, and lots of options are possible. Some options although not complete are listed below. The op scripts could reside on each device and be manually triggered by an operator. The op scripts could reside off-box and triggered by say ...

Hi I don't know if it's the answer you're looking for, but let me introduce you to on-box and off-box concepts(This is a Juniper term). ■on-box: To execute arbitrary commands, you'll need to use an op script as demonstrated here. ...