Junos OS

Effective April 2, 2025, Juniper will no longer accept cases for Junos v17.x, and effective Oct 1, 2025, Juniper will no longer accept cases for Junos v18.x and 19.x. *Effective December 31, 2025, Juniper will no longer accept software support cases ...

This is the final post in the #JumpstartJSI series. Special thanks to @Devin and @pgoddard for their contributions. Below is a quick overview of the series: Why Connect to JSI Juniper Support Insights (JSI) extends support automation & ...

Hey Andy, We use SNMP exporter for this with a custom config, so yes, we do get on particular OIDs (after generating the initial config of SNMP exporter). Cheers, Andrei ------------------------------ ANDREI NEAGOE ----------------------------- ...

Hi Michiel, In answer to your questions. Yes, I am a Juniper employee. I'm offering a workaround as an interim solution using an SNMP script until such time as this issue is qualified and can be addressed via s/w. Regards, Andy

Hello Andy. Are you from Juniper? If so why would you make a workaround for this problem using a script and not fix the issue in software? ------------------------------ MICHIEL TIMMERS ------------------------------

Hi Andrei, Just a question on how you are going to poll this data for your management system. Are you walking (SNMP Walk) the table and collecting data, parsing it etc., or are you using SNMP Gets for each specific OID that you are interested in obtaining, ...

Sorry to jump to this old thread. We have just met the similar issue when dialing PPPoEv6 from windows 10 PC directly to MX BNG, without CPE between. The win10 PC get the global IPv6 address assigned but it is unusable. While we set just 1 IPv6 address ...