Junos OS

 View Only
last person joined: yesterday 

Ask questions and share experiences about Junos OS.

If you have a question or a use case, likely there are others out there who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge!

Need additional guidance?  Check out these Juniper Resources.


Documentation Day One Books Knowledge Base Junos Software Versions

Latest Discussion Posts

  • Profile Picture

    Junos Upgrade FAQs and Junos EOS enforcement notification ...

    By: Aditya , 3 months ago

    Don't delay, upgrade from Junos releases 12.x, 14.x, 15.x, and 16.x! Effective February 15, 2024, Junos releases 14.x and 16.x cases will no longer be eligible for technical support. Effective August 31, 2024, Junos releases 12.x ...

    4 people recommend this.
  • Profile Picture

    RE: SRX 5600 NTP limitations and algorithm

    By: bkamen , 9 hours ago

    As already mentioned - you don't need a lot of servers. Normally when asking the DNS servers of one of the pools @ NTP.org, they'll hand back 4 servers. (last I checked) This is MORE than plenty to keep a time-keeper on your network happy. I'd have ...

  • Profile Picture

    RE: VRRP

    By: ETH4N3T , 11 hours ago

    Hi Can, Can you please configure on both routers: set interfaces xe-0/1/7 encapsulation flexible-ethernet-services As your configuring this on the physical layer, this may be needed to support ethernet encapsulations at the logical layer. ...

  • Profile Picture

    RE: VRRP

    By: CAN KARANI SNER , 13 hours ago

    Hi; root@MX-BGP-ROUTER-2> show vrrp summary Interface State Group VR state VR Mode Type Address xe-0/1/7.10 up 1 master Active lcl 10.77.79.3 ...

  • Profile Picture

    RE: SRX 5600 NTP limitations and algorithm

    By: Ulf , 15 hours ago

    1. not sure there is a technical limit, but practical I don't think it makes sense to configure more than 7 servers 2. How NTP Works

  • Profile Picture

    RE: VRRP

    By: ETH4N3T , yesterday

    Hi Can, Can you please provide us with an output of both devices? KR,

  • Profile Picture

    MX80, 21.2R3-S5.4, packet-triggered subscribers

    By: DMYTRO VASNIEV , yesterday

    Hi! Im trying to set up packet-triggered subscribers on MX80, 21.2R3-S5.4... and its does not work. No interfaces, no messages to radius. On mx204, 21.4R3-S3.4 same config is working. Does anybody use PT subscribers on MX80, 21.2R3-S5.4? What ...

Announcements

Unanswered Posts

  • MX80, 21.2R3-S5.4, packet-triggered subscribers

  • Power failure stopped my SRX300

  • GRPC Routing-Instance

  • L2vpn/VPLS tranport vlan mapping explanation

  • Ping on cRPD CLI

  • backup routing engine authenticate from in-band in ...

  • gRPC plugin for logstash

Top Contributors in the Community