Junos OS

 View Only
last person joined: yesterday 

Ask questions and share experiences about Junos OS.

If you have a question or a use case, likely there are others out there who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge!

Need additional guidance?  Check out these Juniper Resources.


Documentation Day One Books Knowledge Base Junos Software Versions

Latest Discussion Posts

  • Greetings Juniper Community! This is the first post in an eight-part series of community posts sharing tips and information on one of the hidden benefits of Juniper Care Services, Juniper Support Insights (JSI). JSI extends support automation & lifecycle ...

    2 people recommend this.
  • Don't delay, upgrade from Junos releases 12.x, 14.x, 15.x, and 16.x! Effective February 15, 2024, Junos releases 14.x and 16.x cases will no longer be eligible for technical support. Effective August 31, 2024, Junos releases 12.x ...

    5 people recommend this.
  • This message was posted by a user wishing to remain anonymous Can you use vlans on the AE, make it trunk port, and use IRB with dedicated MAC addresses? Sorry I don't use MX.

  • set interfaces ae0 unit 0 mac ? MX240 with PPPOE does not support address max by subinterface so if there a solution instead PPPOE that allow configure mac address by ae.5 ? this is the problem ...

  • Is it possible that edge is somehow resolving the name and then requesting via IP? Or do you see the name hit in the logs and then the block based on the resolved IP? If it's a bug in Junos (which is very possible) it definitely could be resolved in ...

  • This message was posted by a user wishing to remain anonymous AFAIK, LNS is not terminating PPPoE sessions directly, but only those received via L2TP from LAC. Usually IP address of LNS is terminated on it's loopback, not physical interface/subinterface, ...

  • This problem occurs when the power loss boot/reboot corrupts the running primary disk partition and boot is not longer possible. As a result the device boots from the backup disk partition. The backup partition must be kept in sync with the primary ...

    1 person recommends this.

Announcements

Unanswered Posts

  • 2 people recommend this.

Top Contributors in the Community