Junos OS

 View Only
last person joined: 22 hours ago 

Ask questions and share experiences about Junos OS.

If you have a question or a use case, likely there are others out there who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge!

Need additional guidance?  Check out these Juniper Resources.

Day One +Technical BulletinsTechLibraryJunos Software Versions

Latest Discussion Posts

  • Effective July 1, we will no longer accept or action support cases for Junos Releases 10.x,11.x, and 13.x. Below are the recommended upgrade steps if you are running Junos Releases 10.x, 11.x, or 13.x in your network: *Links in the ...

    2 people recommend this.
  • Yes, they are using the same standard port for the ssl connection. But when you configure JSC and Jweb you choose which SRX interface the service is active on. So the JSC would be on your externally facing interface and the Jweb management would be ...

  • Hi Steve, I have create a certificate for JSC SSL VPN and associate it to web service management, therefore both jweb and JSC are using same port. Can you please tell any other way to disable the JSC Public web access ? ------------------------------ ...

  • There is no option available to change the ports used for these services on the SRX. The only option here is to control which interfaces are configured for the two protocols so you can have both working but on different interfaces. ------------------------------ ...

  • Hi Team. Jweb port is 'X' and Juniper secure connect port is also 'X' in juniper, when i am changing the port jweb port from 'X' to 'Y', then Juniper secure connect port also got changed to 'Y'. I want to separate these (JWEB & JSC) ports. ...

  • The Juniper CX team is looking for enterprise customers who have been involved in purchasing, receiving, or deploying Juniper products in the last year to share your opinion. We invite you to participate in a 45-minute feedback session to discuss your ...

  • Profile Picture

    RE: set cli timestamp

    I haven't tried this with operational commands but there is a way to run a script at the time of login automatically. you would create the op script then assign it to the user class as a login script that executes as these users login. the default login ...

Unanswered Posts

  • 2 people recommend this.

Top Contributors in the Community