Junos OS

 View Only
last person joined: yesterday 

Ask questions and share experiences about Junos OS.

If you have a question or a use case, likely there are others out there who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge!

Need additional guidance?  Check out these Juniper Resources.


Documentation Day One Books Knowledge Base Junos Software Versions

Latest Discussion Posts

  • Don't delay, upgrade from Junos releases 12.x, 14.x, 15.x, and 16.x! Effective February 15, 2024, Junos releases 14.x and 16.x cases will no longer be eligible for technical support. Effective August 31, 2024, Junos releases 12.x ...

    5 people recommend this.
  • Hi everyone. How can I to rewrite in JunOS the following ScreenOS commands:? set category "WHITELIST" url "www.1" set category "WHITELIST" url "www2/" set category "TEST" url "www3/" set category "TEST" url "www4/" Please, any advance I appreciate. ...

  • Hi Yan, For Junos where Python is not available, or if Python is not preferred, then I would look at SLAX, rather than perhaps going down the shell script route. Certainly that would be my approach, and would only look at performing actions via the ...

  • Hi Andy I wonder, if there is similar elegant way to declare operation for shell script? This is pertaining ZTP process on EX-4550 15.1 , which does not have Python installation. Thank you. ------------------------------ Yan Gorelik -------- ...

  • Thank you all for the wonderful help and suggestions, Really appreciated. so SPC 2 card throuput is limitation 3G? if not what is the limitation value for spc2? This SRX 5400 only for ipsec, not for non ipsec testing so I can't see any non ipsec traffic. ...

  • Hi, Another thing that u can try is CoS on Tunnel interface and also do shapping rate on tunnel interface. Try limit traffic on tunnel interface not more than 3G then compare the result. If tunnel stable when traffic below 3G then it related to SPC2 ...

    1 person recommends this.
  • This message was posted by a user wishing to remain anonymous During peak drops, try running "show security monitoring performance spu" Run this multiple times to see if you get numbers in 80s or 90s. That would mean SPC is overloaded. Do you ...

    1 person recommends this.

Announcements

Unanswered Posts

Top Contributors in the Community