Junos OS

 View Only
last person joined: 5 days ago 

Ask questions and share experiences about Junos OS.

If you have a question or a use case, likely there are others out there who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge!

Need additional guidance?  Check out these Juniper Resources.


Documentation Day One Books Knowledge Base Junos Software Versions

Latest Discussion Posts

  • Profile Picture

    Jumpstart JSI Series Overview

    By: Jodi Meier , one month ago

    This is the final post in the #JumpstartJSI series. Special thanks to @Devin and @pgoddard for their contributions. Below is a quick overview of the series: Why Connect to JSI Juniper Support Insights (JSI) extends support automation & ...

    1 person recommends this.
  • Profile Picture

    Junos Upgrade FAQs and Junos EOS enforcement notification ...

    By: Aditya , one year ago

    Don't delay, upgrade from Junos releases 12.x, 14.x, 15.x, and 16.x! Effective February 15, 2024, Junos releases 14.x and 16.x cases will no longer be eligible for technical support. Effective August 31, 2024, Junos releases 12.x ...

    5 people recommend this.
  • Profile Picture

    SNMP error in messages log

    By: foper , 19 hours ago

    We are using SolarWinds to monitor network devices over SNMPv3. Checking the messages log I get the following error: Sep 11 14:18:48 SRX_Router snmpd[29497]: LIBJSNMP_NS_LOG_WARNING: WARNING: _sess_async_send@5315: Encoding failure Result:4294967295 ...

  • Profile Picture

    RE: Simple Config. on Lab set up

    By: spuluka , 5 days ago

    Yes, the SRX is by default a firewall, called flow mode on the device as it maintains a table of source/destination/protocol flow. If you are interested in those features check out the JNCIA-SEC free online course from Juniper for an overview of features ...

  • Profile Picture

    RE: Simple Config. on Lab set up

    By: BEN FELDMAN , 5 days ago

    This worked. I set it to packet-based and now it works. Thanks for the help to both of you. ------------------------------ BEN FELDMAN ------------------------------

  • Profile Picture

    RE: Simple Config. on Lab set up

    By: BEN FELDMAN , 5 days ago

    Thanks for the help. I can try that to see if it works. Ben ------------------------------ BEN FELDMAN ------------------------------

  • Profile Picture

    RE: Simple Config. on Lab set up

    By: BEN FELDMAN , 5 days ago

    Thanks. I didn't know. So the SRX100 is basically a firewall, I guess. I will try that. Thank you. ------------------------------ BEN FELDMAN ------------------------------

Announcements

Unanswered Posts

  • Jumpstart JSI Series Overview

    1 person recommends this.

  • SNMP error in messages log

  • View Logs out side of log collector.

  • NTP Broadcast / Broadcast-client

  • Juniper EX4400-48F 1/10g ports

  • event-options and attributes not showed in the log ...

  • wrong source address contacting RADIUS server

Top Contributors in the Community