Junos OS

 View Only
last person joined: 19 hours ago 

Ask questions and share experiences about Junos OS.

If you have a question or a use case, likely there are others out there who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge!

Need additional guidance?  Check out these Juniper Resources.


Documentation Day One Books Knowledge Base Junos Software Versions

Latest Discussion Posts

  • Don't delay, upgrade from Junos releases 12.x, 14.x, 15.x, and 16.x! Effective February 15, 2024, Junos releases 14.x and 16.x cases will no longer be eligible for technical support. Effective August 31, 2024, Junos releases 12.x ...

    5 people recommend this.
  • WOW! It worked! Thank you so much! ------------------------------ Yan Gorelik ------------------------------

  • Sure. Here you go. The interface xe-0/1/3.25 is the interface that is being scanned. filter FILTER_CUSTOMER_UDP_PORTS { term T1 { from { destination - address { ...

  • There is a configuration knob to permit op scripts to execute Python from a remote device. I've used this approach in a ZTP deployment before. system { scripts { op { allow-url-for-python; } language python; ...

    1 person recommends this.
  • Hi Matt, can you please share the filter configuration and how you applied it? Good examples for such filters can be found at https://www.juniper.net/documentation/en_US/day-one-books/Securing_RouteEngine_v2.pdf Regards Ulf

  • Thank you Andy for very valuable info. I can confirm that op script is working with python2.7. In the configuration need to add the op script definition: system { static-host-mapping { httpserver inet 172.22.23.24 ; } scripts ...

  • You may need to write an op script and have that called via your ztp, instead. ------------------------------ Andy Sharp ------------------------------

    1 person recommends this.

Announcements

Unanswered Posts

Top Contributors in the Community