Log in to ask questions, share your expertise, or stay connected to content you value. Don’t have a login? Learn how to become a member.
If you have a question or a use case, likely there are others out there who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge!
Need additional guidance? Check out these Juniper Resources.
Documentation Day One Books Knowledge Base Junos Software Versions
This is the final post in the #JumpstartJSI series. Special thanks to @Devin and @pgoddard for their contributions. Below is a quick overview of the series: Why Connect to JSI Juniper Support Insights (JSI) extends support automation & ...
Don't delay, upgrade from Junos releases 12.x, 14.x, 15.x, and 16.x! Effective February 15, 2024, Junos releases 14.x and 16.x cases will no longer be eligible for technical support. Effective August 31, 2024, Junos releases 12.x ...
Model: EX3400 and EX2300-C Firmware: 21.4R3-S7.6 We recently ran into a problem where the EAP-Message attribute is still being sent to our RADIUS servers even when "mac-radius" or "mac-radius restrict" is set. As far as we can tell this started ...
Maybe / probably by using only SP-Style vlans for vlans present on the port where you need at least one SP-style vlan for QinQ by example). I guess you lose spanning-tree, native-vlan, igmp-snooping for those ports, I don't even know if you can still ...
I will be updating my EX3400 to most recent firmware this or next week once i will prepare some other temprary switch to replace it for the time of update. It is neccesary due to very old firmware which will require several reboots and it will takę a ...
You can mix things on EX4600 and recent enough JunOS (including 18.4R3). But I think on EX2300 / EX3400, you can't mix unit 0 with family ethernet-switching vlans, and other units with service-provider style QinQ vlans (or layer 3) on the same port... ...
The problem is that my ISP won't be doing the outer tagging. I need to make the outer tagging on my EX4600, which is connected to my ISP via Aggregated Interface (two ex4600 in virtual chasis), for vlans 200-210 with outer tag 1510 and my ISP will send ...
While you can no longer get support for your Junos 14.x and 16.x network, you CAN upgrade to a supported Junos version.
Log in to see this information