Junos OS

Don't delay, upgrade from Junos releases 12.x, 14.x, 15.x, and 16.x! Effective February 15, 2024, Junos releases 14.x and 16.x cases will no longer be eligible for technical support. Effective August 31, 2024, Junos releases 12.x ...

Hi all, I need to upgrade my switches soon with minimum outage downtime. I need your advice on this. See below for the VC setup. I would like to upgrade them to a recommended version. So which method should I apply it to do the upgrade. I understand ...

Hi, I'm trying to setup sflow on a MX204 running Junos 19.4R2.6 but I don't see any samples begin sent to the collector. Here is the relevant config: set protocols sflow agent-id 10.177.123.20 set protocols sflow polling-interval 5 set protocols ...

Support recommended the following 20.2R3-S2 > 20.4R3-S3.4 > 21.4R3-S4.9 > 22.4R2-S1.6

Hi Liju, Checking online I have found this repo on Github that supposably converts the configuration from ASA to SRX: https://github.com/joshcorr/asa-to-srx-converter but as I've not used this myself, I can't guarantee this works. I do know ...

Related Question regarding upgrade from release 20 to 21 to 22 for Junos Fusion Provider Edge on dual REs. To minimize outages caused by satellite device reboots I am planning the following procedure: Beginning state: RE0 and RE1 are both at 20.4R3-S7.2 ...

No, I've not fixed the issue and I am going to put in a different router just for dhcpv6 termination. Does the MX960 have subscriber-services enabled? That is the only thing I can think that is triggering this behavior because I have other MX routers ...