Junos OS

 View Only
last person joined: 2 days ago 

Ask questions and share experiences about Junos OS.

If you have a question or a use case, likely there are others out there who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge!

Need additional guidance?  Check out these Juniper Resources.

Day One +Technical BulletinsTechLibraryJunos Software Versions

Latest Discussion Posts

  • Don't delay, upgrade from Junos releases 12.x, 14.x, 15.x, and 16.x! Effective February 15, 2024, Junos releases 14.x and 16.x cases will no longer be eligible for technical support. Effective August 31, 2024, Junos releases 12.x ...

    2 people recommend this.
  • Profile Picture

    RE: Q-in-Q - S-Tags

    There is an example configuration in the knowledge base here that works with both tagged or untagged inbound traffic. https://supportportal.juniper.net/s/article/MX-ACX-Example-Configuration-Q-in-Q-tunneling-for-receiving-both-untagged-and-tagged-traffic ...

  • Profile Picture

    Q-in-Q - S-Tags

    I want, as an ISP, to be able to encapsulate C-Tags with my own S-Tags as the packets traverse my network. Is there documentation anywhere that can show the configuration on an MX required to complete this Q-in-Q S-Tag encapsulation? ------------------------------ ...

  • Hello everyone, I have a forwarding type routing instance which i leak all routes from a BGP group and even though the routes are in the table when i ping using the instance i get the error: "ping: sendto: Can't assign requested address" Here is the ...

  • Yes, MX960 is enabled subcriber-manager feature. One WA, you can use the knob "forward-only" under dhcpv6 relay. It would not create the demux interface to manage binding. While troublshooting, we found that MX did not reply NS packet from client. And ...

  • I've recently upgraded a test MX150 from 17.3R3.10 directly to 22.2R3.15. After the upgrade, the basic DHCP server config below does not work (this is the only config on the router apart from root credentials). The server process is running but a device ...

  • Hi all, I need to upgrade my switches soon with minimum outage downtime. I need your advice on this. See below for the VC setup. I would like to upgrade them to a recommended version. So which method should I apply it to do the upgrade. I understand ...

Announcements

Unanswered Posts

Top Contributors in the Community