Junos OS

Hello, I have a VMware server with two VMNIC'S, I want to connect them to Juniper Switch, those two VMNIC'S for public network redundancy one is active and the other is standby ( nic teaming) The question is can I configure both as normal ...

Hi, I've a EX2300-24T for my homelab to be more comfortable with Juniper products. Unfortunately I dont get the web interface running. I tried it with set system service web-mangement http interface all but everything I got is a "access denied". ...

This sound almost like the factory config you get on low end SRXs. It will have a default inside network ( something like 192.168.1./24 ) and config will NAT this /24 to whatever you have on the outside. ( typically a service provider /31 or /30 network ...

It looks like i accidentally found a solution for this "problem". I'm not sure why this works but reinstalling the box via tftp method seems to fix it. When reinstalling it looks like it's necessary to have a working config (not the default one) on the ...

Hi there, Suppose I have a switch (EX3300 in this case) with both routed interfaces (ge-X/X/X.0 family inet, ip address set) and L3 vlan interfaces (vlan.X family inet, address set). I have some "site scoped" multicast traffic (so it's not link scoped, ...

You would assign a vlan for the internal /24 subnet and then determine if you want to have multiple ports on the SRX assigned to this or just a single port that is connecting to a down stream switch. With multiple ports these all get assigned to the ...

This message was posted by a user wishing to remain anonymous As stated in the documentation: https://www.juniper.net/documentation/us/en/software/junos/interfaces-ethernet-switches/topics/topic-map/switches-interface-aggregated.html Aggregated ...