Junos OS

 View Only
last person joined: 4 days ago 

Ask questions and share experiences about Junos OS.

If you have a question or a use case, likely there are others out there who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge!

Need additional guidance?  Check out these Juniper Resources.


Documentation Day One Books Knowledge Base Junos Software Versions

Latest Discussion Posts

  • Don't delay, upgrade from Junos releases 12.x, 14.x, 15.x, and 16.x! Effective February 15, 2024, Junos releases 14.x and 16.x cases will no longer be eligible for technical support. Effective August 31, 2024, Junos releases 12.x ...

    5 people recommend this.
  • Hi Marcel, Thank you for your response. I am using EX4100-F-12T model. I do see the option for link-mode on the copper ports but not on the fiber uplink ports. I converted the vcp ports to the network ports. I found this KB below. When I try to ...

  • Sorry, here is the correct syntax: set access address-assignment pool junosDHCPPool family inet dhcp-attributes name-server 10.10.10.1 ------------------------------ PAUL PETERSON ------------------------------

  • Hi, On the ex4100 the command to set the duplex on an interface is: set interfaces ge-0/0/9 link-mode full-duplex set interfaces ge-0/0/9 link-mode ? Possible completions: full-duplex Full-duplex operation half-duplex Half-duplex ...

  • Hi Paul, When I added set access address-assignment pool junosDHCPpool dhcp-attributes name-server 10.10.10.1, it showed the below error. It seems that I have not the configuration? ------------------------------ Tokumasa Sanada ----------- ...

  • Hi Steve, Thank you for your response. I don't see the option for link-mode to set the full-duplex. # set interfaces ge-0/1/3 ether-options ? Possible completions: > 802.3ad IEEE 802.3ad + apply-groups Groups from which ...

  • You generally need to turn off auto-neg and set both speed and duplex manually when these missed negotiations occur. I think these are the three commands you'll use. set interfaces ge-0/1/3 speed 1g set interfaces ge-0/1/3 ether-options link-mode ...

Announcements

Unanswered Posts

Top Contributors in the Community