Log in to ask questions, share your expertise, or stay connected to content you value. Don’t have a login? Learn how to become a member.
Bits and Bytes Articles on Automated WAN Solutions, from Network Engineers to Network Engineers.
Browse Posts
I've only done vpls port mirrors on mx devices so not sure if it is supported on the SRX. But here is the kb on the setup. https://supportportal.juniper.net/s/article/MX-How-to-configure-Layer-2-VPLS-Port-Mirroring ------------------------------ Steve Puluka BSEET - Juniper Ambassador IP Architect ...
I will certainly do what has been recommended. I realize I need to make some changes to my equipment. I use it as an intermediate device. It has use, and safety is a concern. Thx, Puluka ------------------------------ Adrian Aguinaga B.S.C.M. I.T.T. Tech (Construction Management) A.A.S. I.T.T. Tech ...
Hello, my SRX300 says that it boots from the backup partition: *********************************************************************** ** ** ** WARNING: THIS DEVICE HAS BOOTED FROM THE BACKUP JUNOS IMAGE ** ** ** ** It is possible that the primary copy of JUNOS failed to boot up ** ** ...
Hello everyone, I'm currently working on monitoring the traffic exchanged with one of our clients using either SRX1500 or SRX550, both running software version 19.4. We're utilizing a VPLS connection for this communication. I'd like to implement a port mirroring solution to analyze this traffic in-depth. ...
Hi, I would suggest to try 2 things Try to use IP address instead of interface as next-hop in COS forwarding policy. In policy statement itself, I think accept action is unnecessary for T1 term, just COS next-hop-map should be enough. ------------------------------ FARID AKHUNDOV ----- ...
In case next hop of the received prefix from eBGP neighbor is not reachable, it will not be accepted. Even if you apply import policy to fix the next hop, the prefix needs to first be ACCEPTED, after which its next can be modified. Classic example is 6PE, when you use a single IPv4 link for both IPv4 ...
Hi Marc, I know it is old thread but it contains a lot of valuable info. By default, Junos OS does not maintain the route for indirect next hop to forwarding next-hop binding on the Packet Forwarding Engine forwarding table... .so that is why special configuration is needed to accept those indirect ...
High-level functionality description of BIER as MVPN provider tunnels in the upcoming release of PTX Express 5. Introduction In Cheers! Have a BIER , we explained how BIER [RFC8279] works and how it has come to a prime time for BIER deployment with the hardware capabilities from several major vendors across the edge/access/core platforms. ...
What does differentiate the ACX7024X from the ACX7024 devices? In this short article, we will explain the differences and the motivation behind the creation of this new router. Introduction We launched the ACX7024 in mid-2022, with the following characteristics: 1RU Ethernet router. Built for the aggregation of SFP ...
Using Juniper vSRX on hardware with constrained resources, typically a mini-PC serving as flexible Internet gateway. Those are lately very popular due to low footprint yet with capabilities making them suitable for running virtual machines. Introduction At very minimum, a mini-PC is tool for engineers to have x86 based SRX ( vSRX ) at home ...
We’re all about connections, so make it easy for you to hop over to your favorite social channels.
Collaborate on Juniper projects with developers worldwide.
See more
Use pre-built topologies to explore our products and solutions—all for free.