Junos OS

Greetings Juniper Community! This is the first post in an eight-part series of community posts sharing tips and information on one of the hidden benefits of Juniper Care Services, Juniper Support Insights (JSI). JSI extends support automation & lifecycle ...

Don't delay, upgrade from Junos releases 12.x, 14.x, 15.x, and 16.x! Effective February 15, 2024, Junos releases 14.x and 16.x cases will no longer be eligible for technical support. Effective August 31, 2024, Junos releases 12.x ...

True, what is not self-updated after JunOS update or reboot are some RE real firmwares/ROM (RE BIOS, RE SSD Firmwares...)... and PoE firmware in EX. But not all, as some firmwares on cards are updated by example :D ------------------------------ ...

Sometimes a general firmware update to an EX switch also includes a POE unit update, but, you need to run a separate command to actually have it install the POE update; it does not happen as part of the main firmware update. So after you've booted into ...

Just found the solution. The interface I was using is IRB which is declared as a layer 3 Interface. Because the interface is layer 3 interface, no layer 2 802.1p tag is available to rewrite. I used a vlan tagging interface instead and It Worked. ...

The software running on each card (PFE) is actually «upgraded» each time the PFE boots ; actually it downloads its own software from the routing engine at each PFE boot if there's a mismatch. So not specially / not only when you upgrade the main JunOS. ...

Hello, Are there any JSI sessions scheduled in other timezones? Can this tool be used by Juniper Partners to support all their customers in a single centralized portal? ------------------------------ WOJCIECH JANISZEWSKI ...