1 to 10 of 10
Sort by

Discussion Post
SRX 5800 - RG0 Failover

Hi, We have a pair of SRX5800 running in an High-availability cluster. We did a manual failover from node0 to node1 and all the BGP peers flapped. Is this the expected behavior and was forwarding of packets afftected during the RG0 failover ? Is there any feature or configuration...

Discussion Post
Internet failover with dual-ISP configuration and routing-instances by using IP monitoring

We have a SRX320 with two ISPs connected to the ge-0/0/0 and ge-0/0/2 interfaces and trusted subnets connected to the ge-0/0/5 interface. We use both ISPs for destination NATs to forward ports from the Internet to trusted subnets. To solve the problem with asymmetric NAT, for...


Discussion Post
IP-monitoring multiple route failover

I have two possible exits from my LAN to my data center. One is a point-to-point path, and the other is an MPLS path. The P2P is supposed to be primary for all non-voice data traffic with failover to the MPLS; the MPLS exit is primary for all voice-related traffic. The secondary path is just...

Discussion Post
Modifying routing table with ip-monitoring

I am running BGP on an SRX-100. I have two active interfaces, "A" & "B". (A) To BGP Peer <--> SRX100 <--> (B) Static Default Route Interface B is normally the default route which is assigned statically. Interface A is dynamically routing via BGP and is...

Discussion Post
Failover doesn't work between HA SRX240

Hi all, I have configured a cluster between 2 SRX240 and routing seems to work fine. Failover doesn't work. HA config is as follows: ## Last commit: 2009-09-10 06:37:49 UTC by root version 9.6R1.13; groups ( node1 ( system ( host-name au.fw node1; root-authentication ( encrypted-password ...