Search

1 to 7 of 7
Sort by

Discussion Reply
RE: Cisco ACL Config to Juniper ACL Config (Migration)

Hi Nellikka and All, Thanks for your answer! Here is the Cisco Configuration. ! route-map CONN-BGP permit 20 match ip address CISCO set origin igp set community 5005:20 ! route-map STATIC-BGP permit 10 match ip address CISCO-BLOCK set origin igp set community 5005:0 5005...


Discussion Reply
RE: Cisco ACL Config to Juniper ACL Config (Migration)

Hi Pradeep and all, I know the I2J sites and already convert the Configuration. Question1: Is it correct the above Config? If it is, What is purpose on CISCO-BLOCK ACL? I DON'T UNDERSTAND CISCO-BLOCK's purpose. Thanks in Advance, #Migration #Juniper #FirewallFilter #cisco #ACL


Discussion Post
Cisco ACL Config to Juniper ACL Config (Migration)

Hi all! My customer wants to change Cisco router to Juniper MX480. However, I don't know the differecnce between Cisco's acl standard and extended. ! ip access-list standard CISCO permit 17.17.17.0 0.0.0.255 permit 217.217.217.0 0.0.0.255 ! ip access-list extended CISCO-BLOCK...



Discussion Post
configure QoS for a port with specific Access List match

I am looking to configure my QFX5100 32Q switch with a QoS for a specific ACL match. 1) I would like to specifiy a ACL rule (with match field based on 5-tuple) 2) For the traffic that matches the 5-tuple I would like to define QoS metric with action such as: DSCP marking and Rate-limiting...



Blog Entry
Scripting How-To: Enforce a login-based CLI access from an authorized subnet

Enforce a Login-based CLI Access From an Authorized Subnet For SLAX version 1.0 and higher, you can use the check-file-acl script to e nforce a login-based CLI access from an authorized subnet only. This event script restricts the CLI access to logins from an authorized subnet...