Community Home

Hi Innovators! Thank you so much for your active participation in our December post where we asked for your thoughts on the word "Cloud" in product names . Here's a sample of what your industry peers shared: And here's what the Juniper ...

Hello everyone! I apologize for not being around the last couple of weeks. I was out there traveling on the conference scene. First I was over in Paris for SD-WAN and SASE 2022 . I had a lot of fun on this trip and got to speak with a TON of people ...

Hi Community, I could see the following logs often from several switches. It shows only VLAN ### (native): Mar 15 07:29:06 SWITCH-A l2ald[9147]: L2ALD_MAC_MOVE_EXCEEDED_BD: Limit on MAC moves exceeded at VLAN Dxxx + ### for MAC aa:bb:cc:dd:ee:ff ...

Hello @spuluka Thanks a lot for the answer if I post the config would it help to show the isssue ? Best Regards ------------------------------ Zurratos Zurratos ------------------------------

Hi Spuluka, Noted. Thanks for your feedback. I will try look into that Nagios.

That is the OID area for IPSEC monitoring. You would select the specific parameters you want to monitor and enter the OID values per the monitoring platform. I had not used Juniper NMS but setup monitoring pages for tunnel up and down listings in Nagios ...

Do the AP34 and AP34E support RTT (round trip time) measurements? ------------------------------ Andrew Meszaros ------------------------------