Community Home

Hi Innovators! Thank you so much for your active participation in our December post where we asked for your thoughts on the word "Cloud" in product names . Here's a sample of what your industry peers shared: And here's what the Juniper ...

Hello everyone! I apologize for not being around the last couple of weeks. I was out there traveling on the conference scene. First I was over in Paris for SD-WAN and SASE 2022 . I had a lot of fun on this trip and got to speak with a TON of people ...

I created a new interface on port on xe-2/0/2 added all the necessary information to it, when i exit configuration mode and do "show interfaces xe-2/0/2" it gives me an error message. "error: device xe-2/0/2 not found" why would this be happening? ...

I am utilizing a SRX 380. The SRX currently has a /30 IP that is only routable across the Agency WAN. I am being assigned a /24 for backend devices that need access to internet. The backend IP space is RFC 1918 that gets nat'd to /30. There is a BGP peering ...

Example topology: custA / custB > switch1 > EX4650 > switch2 > custA / custB custA outer tag 101 custB outer tag 102 The EX4650 should allow any inner tag on both vlan 101 and 102. Does trunk mode also pass double tags or is something additional ...

This message was posted by a user wishing to remain anonymous As stated in the documentation: https://www.juniper.net/documentation/us/en/software/junos/interfaces-ethernet-switches/topics/topic-map/switches-interface-aggregated.html Aggregated ...

Spanning tree is a protocol that prevents layer 2 loops in standard vlan stack switching. From you diagram I wonder if you have a device with two ports connected to the same vlan on two edge switches that are then joined via the core. This would be ...