Community Home

Hi Innovators! Thank you so much for your active participation in our December post where we asked for your thoughts on the word "Cloud" in product names . Here's a sample of what your industry peers shared: And here's what the Juniper ...

Hello everyone! I apologize for not being around the last couple of weeks. I was out there traveling on the conference scene. First I was over in Paris for SD-WAN and SASE 2022 . I had a lot of fun on this trip and got to speak with a TON of people ...

GNS3 does use separate RE and PFE files. I am using the RE's to connect the two. I have seen posts from many years ago with someone on this forum having the same issues with GNS3 and the qfx. His solution was using a different qfx version. It appears ...

Hi I don't understand the problem to the end don't know how to announce /32 to the other peers ? Some example set policy-options community BH members 65530:999 set policy-options community BH-PEERb members 65530:112 set policy-options ...

Hi There are many possibilities why this is happening. First of all, I would check if there are proper entries in the RIR databases on the basis of which the filters are built Then start by verifying that the addresses from which you can't connect ...

Hi, I have TACACS+ server where I have added many OEMs switch like CISCO, JUNIPER,HUAWEI etc. and I have enabled 2FA in my TACACS+ server. Now when I am trying to log in to Cisco switch it's showing the prompt "Enter OTP" or "Enter New Password" when ...

Hello All, We have some strange issue that we need your help in understanding it. We have one of our downstream customers who has own IP/ASN resources and we are giving him IP transit. all was well until early this month when they reported that some ...