Community Home

Hi Innovators! Thank you so much for your active participation in our December post where we asked for your thoughts on the word "Cloud" in product names . Here's a sample of what your industry peers shared: And here's what the Juniper ...

Hello everyone! I apologize for not being around the last couple of weeks. I was out there traveling on the conference scene. First I was over in Paris for SD-WAN and SASE 2022 . I had a lot of fun on this trip and got to speak with a TON of people ...

Hello Andrew, In MIST SLE for Wired you can find information about RTT measurements. So, you can reach through the throughput under it you will find Network inside it latency and jitter. Network The Network Classifier represents issues ...

Thanks very much for these responses, very helpful and much appreciated. Jeff Rowan Poudre School District | I.T. Department Network Engineer II office: 970-490-3441 cell: 970-567-2378

ah, so i take it your ospf is working now. yeah, sounds like what is typical of the virtual environments. making hot/live connections in eve-ng community edition is not allowed either. pro license is required for that. glad you found it. ------------------------------ ...

It seems my issue was that I made the connection between the two routing engines while they were running. It appears that I needed to have them powered off when I connected the xe-0/0/0 on site a to xe-0/0/0 on site b. In GNS3 you can make the connections ...

GNS3 does use separate RE and PFE files. I am using the RE's to connect the two. I have seen posts from many years ago with someone on this forum having the same issues with GNS3 and the qfx. His solution was using a different qfx version. It appears ...