Junos OS

Don't delay, upgrade from Junos releases 12.x, 14.x, 15.x, and 16.x! Effective February 15, 2024, Junos releases 14.x and 16.x cases will no longer be eligible for technical support. Effective August 31, 2024, Junos releases 12.x ...

Thank you for your reply asharp Kind regards ------------------------------ ALEXANDROS TZAMPAZIS ------------------------------

This is good to know. I was told that Junos should only be upgraded in 1 main version at a time. like this... (actually I previously understood that Junos could/should only skip 2 sub-releases at a time, but since then, I've been told that you can go ...

Hello Fred, The shortest upgrade path from 15.1X49 to 22.4R2 for SRX which is tested in Juniper lab is: 15.1X49-D170.4 > 19.4R3 > 22.3R1.9 > 22.4R2 Note: The tests were performed with baseline configuration and no line cards. ...

Hi all, I am new to Juniper. The trust zone of my SRX300 is able to access internet if I configure my SRX for untrust zone to be as dynamic IP from ISP. However, if I configure untrust zone as static IP, the trust zone is unable to access internet. ...

Hi Yan, How are you loading the configuration? Are you using set commands or compiling and loading a configuration file. You can make use of some of the 'replace:', 'merge:' and 'patch:' options available in the configuration stanza, also xmlns has ...

Hi Gavin I found working solution. In the starter configuration I assign dhcp to vme interface. Then my shell script sets needed IP address on me0 interface. I have though yet another question. When my shell script finishes the work I need remove ...