Junos OS

 View Only
last person joined: yesterday 

Ask questions and share experiences about Junos OS.

1 to 50 of 2135 threads (9.7K total posts)
  Thread Subject Replies Last Post Status
Advertise /24 to peer B when /32 with given community accepted from peer A (looking for hints in building import/export filters)
1 17 hours ago by GRZEGORZ DACKA
Original post by Anonymous
ZTP on EX4550-32f 15.1R7-S13 fails to execute shell script
0 3 days ago by Yan Gorelik
J-Web not working on EX2300-24T
2 3 days ago by Max Spangenberg
Two VMNIC'S from VMware to a Juniper switch
5 3 days ago by spuluka
Original post by Zurratos
One External Physical Port Two IPs
2 5 days ago by Simon Bingham (technical debt collector)
Original post by LAVEL BURCH
agentx failed to connect Log File entries
5 5 days ago by Matthias Krause
Original post by ROBERT THORNTON
Static multicast flooding
0 5 days ago by Erik Slagter
Mixed mode lacp for qfx5120
0 7 days ago by Anonymous
Detected Tx Unit Hang
0 7 days ago by Shayon Deb Roy
The storage gets full frequently.
8 11 days ago by Cloud
CRONTAB files disappear after reboot
0 11 days ago by RANDAL STOWELL
MX204 flowspec route issue (RPD process reset)
3 12 days ago by Benjamin.cl
MACSec not working on QFX 5120
4 14 days ago by PETER WILSON
Original post by MARK EVANS
Communication through 2 srx not establishing
5 16 days ago by spuluka
Original post by Anonymous
MX204 upgrade failed from 20.4 to 21.4
0 17 days ago by Benjamin.cl
Source NAT with IPv6 PD
0 18 days ago by i22
Juniper SRX Firewalls DHCP not working with same vlan
0 18 days ago by Anonymous
LACP doesn't work in SRX Layer 3 configuration
0 18 days ago by pechdara_Pin
Internet browsing issue on some websites with VLAN
1 20 days ago by Erik Slagter
Original post by JAMES
MPLS VPN COS in Service Provider
1 22 days ago by SCOTT AITKEN
Original post by SANTOSH PAWAR
DOT1XD_USR_ATHNTICTD_GST_VLAN is not triggred while GuestVLAN is effectvely in action
0 26 days ago by YOUSSEF GHORBAL
Unable to estbalish ebgp link -MX480
0 29 days ago by AMIR COHEN
ubable to esablish bgp seesion
0 29 days ago by AMIR COHEN
JUNOS CLI
2 29 days ago by Johnson V C
How to access SNMP data for non-routing instance interfaces?
2 one month ago by kronicklez
Original post by baldwizard
mx-mpc2-3d (mx240) : How many 10gb ports can it support
2 one month ago by spuluka
Original post by Busby
Filterbased Forwarding not working
2 one month ago by dennis_u
EX3400 Port mirroring not working, Please help!
1 one month ago by Erik Slagter
Original post by Insomnia
JunOS very simple multicast routing (static)
0 one month ago by Erik Slagter
config CGNAT with MX960 and MX-SPC3
0 one month ago by Woratan Phadungkiat
Noob JunOS EVO ftp/ssh issue
2 one month ago by A.leb
iccp and JunOS EVO
2 one month ago by A.leb
BOOTPREPLY could not find client table entry
4 one month ago by wjonline1975
Original post by Erdem
Traffic Chassis
0 one month ago by Guilherme Rigueti
Mx204 fpc down Command aborted, Host Chassis manager connection not stable
3 one month ago by spuluka
Original post by fiber9
Where to buy SSD for mx204?
0 one month ago by fiber9
Restore DSL connection ofter interuption
0 one month ago by Koos147
Junos reports powersupply problem but (show chassis environment) says all ok !!!
2 one month ago by David Rad
NGRE vmhost snapshot
0 one month ago by reymonlu
upgrade firmware path EX Juniper EX2300 and EX3400
1 one month ago by spuluka
Original post by Anonymous
Boot camp for jncie
1 one month ago by aaron.gould
Original post by QURAITUL AIN
How about a catastrophe scenario ...
1 one month ago by LapointeMichel
OSPF - Static Routes
3 one month ago by spuluka
Original post by amit
CSPF
1 one month ago by spuluka
Original post by Guilherme Rigueti
How to remove annotation
3 one month ago by CourtKPrin
Upgrade EX4600 switch Prblem
0 one month ago by Anonymous
Upgrade code - 21.4R3.15 recalled, but is only version available for download
2 2 months ago by markw
Original post by NOEMI BERRY
Troubelshoot Ex: Suddeny traffic is unidirectional from bidirectional
1 2 months ago by spuluka
Original post by fiber9
¿Leap of faith?: upgrade on MX104 from version 13 to version 20. ¿ Can I do it in one step?
3 2 months ago by ralvez
Upgrade MX204. ERROR: Require 12 kernel support
5 2 months ago by bterburg
Original post by MAXIM AGAPOV