Screen OS Firewalls

 View Only

Latest Discussion Posts

  • Profile Picture

    ipsec vpn nat issue

    hi i have established ipsec vpn with remote side. vpn is up . problem is that there is Only one lan ip is allowed from remote end. also only telnet service is allowed. i can telnet from ssg firewall to remote lan but from ssg lan client pc i can not ...

  • am looking at the below kb https://kb.juniper.net/InfoCenter/index?page=content&id=KB14271 and Juniper ssg cli guide The following commands set the number of allowed unsuccessful login attempts to 5 and locks the user account for 60 minutes ...

  • It's highly recommended to have up to date bootloaders, especially if IDP is involved. As far as licenses, yes, updated licenses for each device is required. Otherwise, when a failover occurs, you will miss some functionality that the license gave you ...

  • Hi Ajaz, I don't think you need to match the bootloader but ScreenOS version should be same. Please find the below KB for more details- https://kb.juniper.net/KB6015 Thanks, VIkas ------------------------------ Vikas Singh -------------------- ...

  • Profile Picture

    ISG2000 HA Pre-requisites

    HW and SW have to match on both nodes, but does that include boot loader code etc.. There is also the question of licensing, must that also match for HA to come UP successfully. Kindly share any useful documents or whitepapers on ScreenOS HA Many thanks ...

Latest Shared Files

Log in to see this information

Either the content you're seeking doesn't exist or it requires proper authentication before viewing.

Current Members
54 Members
Hidden Member
community Admin
community Moderator
community Moderator
community Moderator
community Moderator
community Moderator
community Moderator