Search

1 to 8 of 8
Sort by

Discussion Post
Fail - IP-MONITORING DUAL ISP

Guys could someone help me? I have an SRX300 with two ISPs. ISP 1 - VPN ISP 2 - Internet However when ISP2 fails ISP1 does not surf the internet. ip-monitoring ( policy INTERNET-ISP2 ( match ( rpm-probe VR-UNTRUST-ISP2; ) then ( preferred-route ( route 0.0.0.0/0 ( next...



Discussion Post
Internet failover with dual-ISP configuration and routing-instances by using IP monitoring

We have a SRX320 with two ISPs connected to the ge-0/0/0 and ge-0/0/2 interfaces and trusted subnets connected to the ge-0/0/5 interface. We use both ISPs for destination NATs to forward ports from the Internet to trusted subnets. To solve the problem with asymmetric NAT, for...

A2B4D7AC-8B6C-4693-A301-4BC0568B9D84-1-20181019_121359_orn-printer-01_000608-1.jpg



Discussion Post
IP-monitoring multiple route failover

I have two possible exits from my LAN to my data center. One is a point-to-point path, and the other is an MPLS path. The P2P is supposed to be primary for all non-voice data traffic with failover to the MPLS; the MPLS exit is primary for all voice-related traffic. The secondary path is just...



Discussion Post
Modifying routing table with ip-monitoring

I am running BGP on an SRX-100. I have two active interfaces, "A" & "B". (A) To BGP Peer <--> SRX100 <--> (B) Static Default Route Interface B is normally the default route which is assigned statically. Interface A is dynamically routing via BGP and is...