SRX

Hello. I have some error's when update FW my srx240h. i use 12.1X45-D15.5

i do not know, is that normaly updating, but device boot , may be, normaly and working.

-

There is log of upgrade my device FW

http://pastebin.com/DmWWSk6s

-

May be i must flash new FW ?

how about 12.1X46-D10.2 ??

Attachment(s)

jun_flash.txt   40 KB 1 version

@DEMOSS

What exactly is your problem?  It looks like you are able to login and it looks like everything mounted fine.

As this is a very long file, it would be helpful if you could specify line numbers that you think are problematic.

For issues such as this, JTAC should probably be your first stop as they can provide details much faster and assist in an outage situation with a much greater sense of urgency.

Sorry, i do not write lines with error.

it is : 135.136.236.237.411-434.739-.

-

And how about ver to flash ? may be try newest version ?

@DEMOSS

I wrote a long response to this, but ultimately, I would be doing you a disservice if I gave you my opinion, so I deleted it.

Instead:

This is an issue that will be best handled by JTAC.  They are the ones who are qualified to diagnose this issue as it is something that they work with on a daily basis.

They can't help me, cause reseller do not say us, that we must buy a support license.

So they do not want replay question.

-

new federal law 44 - we must do auction procedure for that, but in that year our minestry of education do not have money to that item of expenditure.

-

so i am in a little ass 🙂

-

it's only other country pple do not like help other pple. When i'll go die - you say me "call 911 and be happy men - it is their specialization"

=

=

Can anybody give me a link for a doc, manual, solution or analogue, where i can read about VR instance.

i have 2 providers and 3 static ip pool. so i think about build 9 VR instance and connect networks, application and servers to that instance.

for example:

set interfaces ge-0/0/0 unit 0 family inet address 178.19.246.153/29
set interfaces ge-0/0/0 unit 0 family inet address 178.19.246.153/29 arp 178.19.246.154 mac 00:00:00:00:01:54 publish
set interfaces ge-0/0/0 unit 0 family inet address 178.19.246.153/29 arp 178.19.246.155 mac 00:00:00:00:01:55 publish
set interfaces ge-0/0/0 unit 0 family inet address 178.19.246.153/29 arp 178.19.246.156 mac 00:00:00:00:01:56 publish
set interfaces ge-0/0/1 unit 0 family inet address 178.19.242.225/29
set interfaces ge-0/0/1 unit 0 family inet address 178.19.242.225/29 arp 178.19.242.226 mac 00:00:00:00:02:26 publish
set interfaces ge-0/0/2 unit 0 family inet address 217.77.50.129/29
set interfaces ge-0/0/2 unit 0 family inet address 217.77.50.129/29 arp 217.77.50.130 mac 00:27:0d:a7:4d:21 publish
set interfaces ge-0/0/2 unit 0 family inet address 217.77.50.129/29 arp 217.77.50.131 mac 00:02:63:d8:8f:02 publish

-

server 192.168.11.11 all service nating to 178.19.246.155 and have access to internet

server 192.168.11.22 all service nating to 217.77.50.131 and have access to internet

-

pool 178.19.246.153-156 have GW 178.19.246.158

pool 178.19.242.225-226 have GW 178.19.242.230

pool 217.77.50.129-131 have GW 217.77.50.135

-

Wery big thanks for future help!

8( no documents ?

For routing instances :
http://kb.juniper.net/InfoCenter/index?page=content&id=KB16453&smlogin=true
http://www.juniper.net/techpubs/en_US/junos12.1/topics/concept/routing-instance-security-type-understanding.html

For multiple isp scenario :

http://kb.juniper.net/InfoCenter/index?page=content&id=KB17223
http://www.juniperlab.info/p/route-failover-in-typical-dual-isp.html
http://kb.juniper.net/InfoCenter/index?page=content&id=KB22052
http://www.mustbegeek.com/configure-dual-isp-link-failover-in-juniper-srx/

Regards.
c_r

Note: If this answers your question, you could mark this post as accepted solution, that way it helps others as well. Kudos will be cool if I earned it!

truth is out there !

Using FBR\FBF i can construct engine that can give access to internet different ip's ( source-address )

And if isp 1 filure - some network route to another VR ? Yes?

Or i must know something else ?

-

Thank for your help, now i see i can do that in close future!