U-Boot 1.1.6-JNPR-2.3 (Build time: Apr 23 2012 - 04:00:06) SRX_240_HIGHMEM board revision major:2, minor:52, serial #: AAEV9178 OCTEON CN5230R-SCP pass 2.0, Core clock: 600 MHz, DDR clock: 333 MHz (666 Mhz data rate) DRAM: 1024 MB Starting Memory POST... Checking datalines... OK Checking address lines... OK Checking 512K memory for U-Boot... OK. Running U-Boot CRC Test... OK. Flash: 4 MB USB: scanning bus for devices... Root Hub 0: 4 USB Device(s) found Root Hub 1: 1 USB Device(s) found scanning bus for storage devices... 2 Storage Device(s) found Clearing DRAM........ done BIST check passed. 1:00:00.0 Vendor/Device ID = 0x811210b5 1:01:07.0 Vendor/Device ID = 0xc72414e4 Boot Media: nand-flash usb Net: octeth0 POST Passed Press SPACE to abort autoboot in 1 seconds ELF file is 32 bit Loading .text @ 0x8f000078 (246924 bytes) Loading .rodata @ 0x8f03c504 (13944 bytes) Loading .rodata.str1.4 @ 0x8f03fb7c (16776 bytes) Loading set_Xcommand_set @ 0x8f043d04 (100 bytes) Loading .rodata.cst4 @ 0x8f043d68 (20 bytes) Loading .data @ 0x8f044000 (5608 bytes) Loading .data.rel.ro @ 0x8f0455e8 (120 bytes) Loading .data.rel @ 0x8f045660 (136 bytes) Clearing .bss @ 0x8f0456e8 (11656 bytes) ## Starting application at 0x8f000078 ... Consoles: U-Boot console Found compatible API, ver. 2.3 FreeBSD/MIPS U-Boot bootstrap loader, Revision 2.3 (builder@evenath.juniper.net, Mon Apr 23 04:24:39 UTC 2012) Memory: 1024MB [4]Booting from nand-flash slice 2 Un-Protected 1 sectors writing to flash... Protected 1 sectors Loading /boot/defaults/loader.conf /kernel data=0xb096a4+0x1345dc syms=[0x4+0x8ae90+0x4+0xc9722] Hit [Enter] to boot immediately, or space bar for command prompt. Type '?' for a list of commands, 'help' for more detailed help. loader> install file:///jun.tgz /kernel data=0xb096a4+0x1345dc syms=[0x4+0x8ae90+0x4+0xc9722] Kernel entry at 0x801000e0 ... init regular console Primary ICache: Sets 64 Size 128 Asso 4 Primary DCache: Sets 1 Size 128 Asso 64 Secondary DCache: Sets 512 Size 128 Asso 8 GDB: debug ports: uart GDB: current port: uart KDB: debugger backends: ddb gdb KDB: current backend: ddb kld_map_v: 0x8ff80000, kld_map_p: 0x0 Copyright (c) 1996-2013, Juniper Networks, Inc. All rights reserved. Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. JUNOS 12.1X45-D15.5 #0: 2013-09-19 07:42:15 UTC builder@svl-junos-pool92.juniper.net:/volume/build/junos/12.1/service/12.1X45-D15.5/obj-octeon/juno s/bsd/kernels/JSRXNLE/kernel JUNOS 12.1X45-D15.5 #0: 2013-09-19 07:42:15 UTC builder@svl-junos-pool92.juniper.net:/volume/build/junos/12.1/service/12.1X45-D15.5/obj-octeon/juno s/bsd/kernels/JSRXNLE/kernel real memory = 1073741824 (1024MB) avail memory = 492883968 (470MB) FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs Security policy loaded: JUNOS MAC/pcap (mac_pcap) Security policy loaded: JUNOS MAC/runasnonroot (mac_runasnonroot) netisr_init: !debug_mpsafenet, forcing maxthreads from 4 to 1 cpu0 on motherboard : CAVIUM's OCTEON 52XX CPU Rev. 0.8 with no FPU implemented L1 Cache: I size 32kb(128 line), D size 8kb(128 line), sixty four way. L2 Cache: Size 512kb, 8 way obio0 on motherboard uart0: on obio0 uart0: console (9600,n,8,1) twsi0 on obio0 dwc0: on obio0 usb0: on dwc0 usb0: USB revision 2.0 uhub0: vendor 0x0000 DWC OTG root hub, class 9/0, rev 2.00/1.00, addr 1 uhub0: 1 port with 1 removable, self powered uhub1: vendor 0x0409 product 0x005a, class 9/0, rev 2.00/1.00, addr 2 uhub1: single transaction translator uhub1: 3 ports with 2 removable, self powered umass0: STMicroelectronics ST72682 High Speed Mode, rev 2.00/2.10, addr 3 umass1: Kingston DT Mini 10, rev 2.00/1.00, addr 4 dwc1: on obio0 usb1: on dwc1 usb1: USB revision 2.0 uhub2: vendor 0x0000 DWC OTG root hub, class 9/0, rev 2.00/1.00, addr 1 uhub2: 1 port with 1 removable, self powered cpld0 on obio0 pcib1: on obio0 Disabling Octeon big bar support PCIe: Waiting for port 0 to finish reset PCIe: Port 0 link active, 2 lanes PCIe: Waiting for port 1 to finish reset PCIe: Port 1 link active, 1 lanes pcib1: Initialized controller pci0: on pcib1 pcib2: irq 0 at device 0.0 on pci0 pci1: on pcib2 pci1: at device 2.0 (no driver attached) pci1: at device 7.0 (no driver attached) pcib0: on obio0 pci2: on pcib0 pci2: at device 0.0 (no driver attached) gblmem0 on obio0 octpkt0: on obio0 cfi0: on obio0 Timecounter "mips" frequency 600000000 Hz quality 0 ###PCB Group initialized for udppcbgroup ###PCB Group initialized for tcppcbgroup md0: Preloaded image 10012672 bytes at 0x80e9223c da1 at umass-sim1 bus 1 target 0 lun 0 da1: Removable Direct Access SCSI-2 device da1: 40.000MB/s transfers da1: 7634MB (15636304 512 byte sectors: 255H 63S/T 973C) da0 at umass-sim0 bus 0 target 0 lun 0 da0: Removable Direct Access SCSI-2 device da0: 40.000MB/s transfers da0: 1000MB (2048000 512 byte sectors: 64H 32S/T 1000C) Trying to mount root from cd9660:/dev/md0 WARNING: preposterous time in file system WARNING: clock 9695 days greater than file system time tty: not found Starting JUNOS installation: Source Package: disk1:/jun.tgz Target Media : internal Product : srx240h Computing slice and partition sizes for /dev/da0 ... Media check on da0 Attempting to save existing configuration... ** /dev/da0s3e ** Last Mounted on /config ** Phase 1 - Check Blocks and Sizes ** Phase 2 - Check Pathnames ** Phase 3 - Check Connectivity ** Phase 4 - Check Reference Counts ** Phase 5 - Check Cyl groups 13 files, 18 used, 12420 free (20 frags, 1550 blocks, 0.2% fragmentation) ***** FILE SYSTEM MARKED CLEAN ***** Found configuration in /dev/da0s3e Formatting target media /dev/da0 ... Preparing to create slices on /dev/da0 /dev/da0: 2048000 sectors [C:1000 H:64 S:32 SS:512] Shrinking slice 1 by 256 blocks for alignment 1+0 records in 1+0 records out 512 bytes transferred in 0.000383 secs (1337163 bytes/sec) Creating slices: g c1000 h64 s32 p 1 0xA5 256 610048 p 2 0xA5 610304 610304 p 3 0xA5 1220608 763904 p 4 0xA5 1984512 63488 a 1 ******* Working on device /dev/da0 ******* Computing layout of partitions in /dev/da0s1... Shrinking partition a by 1792 blocks for alignment Labeling /dev/da0s1: bsdlabel: write to disk label supressed - label was as follows: # /dev/da0s1: 8 partitions: # size offset fstype [fsize bsize bps/cpg] a: 608000 256 unused 0 0 c: 610048 0 unused 0 0 # "raw" part, don't edit /dev/da0s1a: 296.9MB (607996 sectors) block size 16384, fragment size 2048 using 4 cylinder groups of 74.22MB, 4750 blks, 9600 inodes. super-block backups (for fsck -b #) at: 32, 152032, 304032, 456032 Computing layout of partitions in /dev/da0s2... Labeling /dev/da0s2: bsdlabel: write to disk label supressed - label was as follows: # /dev/da0s2: 8 partitions: # size offset fstype [fsize bsize bps/cpg] a: 610048 256 unused 0 0 c: 610304 0 unused 0 0 # "raw" part, don't edit /dev/da0s2a: 297.9MB (610044 sectors) block size 16384, fragment size 2048 using 4 cylinder groups of 74.47MB, 4766 blks, 9600 inodes. super-block backups (for fsck -b #) at: 32, 152544, 305056, 457568 Computing layout of partitions in /dev/da0s3... Shrinking partition e by 256 blocks for alignment Labeling /dev/da0s3: bsdlabel: write to disk label supressed - label was as follows: # /dev/da0s3: 8 partitions: # size offset fstype [fsize bsize bps/cpg] c: 763904 0 unused 0 0 # "raw" part, don't edit e: 50944 256 unused 0 0 f: 712704 51200 unused 0 0 /dev/da0s3e: 24.9MB (50940 sectors) block size 16384, fragment size 2048 using 4 cylinder groups of 6.22MB, 398 blks, 896 inodes. super-block backups (for fsck -b #) at: 32, 12768, 25504, 38240 /dev/da0s3f: 348.0MB (712700 sectors) block size 16384, fragment size 2048 using 4 cylinder groups of 87.00MB, 5568 blks, 11136 inodes. super-block backups (for fsck -b #) at: 32, 178208, 356384, 534560 Computing layout of partitions in /dev/da0s4... Shrinking partition e by 256 blocks for alignment Labeling /dev/da0s4: bsdlabel: write to disk label supressed - label was as follows: # /dev/da0s4: 8 partitions: # size offset fstype [fsize bsize bps/cpg] a: 57344 6144 unused 0 0 c: 63488 0 unused 0 0 # "raw" part, don't edit e: 5888 256 unused 0 0 /dev/da0s4a: 28.0MB (57340 sectors) block size 16384, fragment size 2048 using 4 cylinder groups of 7.00MB, 448 blks, 896 inodes. super-block backups (for fsck -b #) at: 32, 14368, 28704, 43040 /dev/da0s4e: 2.9MB (5884 sectors) block size 16384, fragment size 2048 using 3 cylinder groups of 1.00MB, 64 blks, 128 inodes. super-block backups (for fsck -b #) at: 32, 2080, 4128 Creating root filesystem layout ... Extracting contents of package ... Verified SHA1 checksum of /a/cf/install/junos-boot-srxsme-12.1X45-D15.5.tgz Verified SHA1 checksum of /a/cf/install/junos-srxsme-12.1X45-D15.5-domestic Time and ticks drifted too much, resetting synchronization... /sbin/init: cannot create /var/sw/pkg/.firstrebootfile: Read-only file system Creating var filesystem layout ... Restoring saved configuration. Creating bsdlabel recovery information ... Initializing inactive slice ... machdep.bootsuccess: 0 -> 1 machdep.nextbootdev: nand-flash -> nand-flash Installation completed successfully, rebooting ... Waiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `vnlru_mem' to stop...done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining...0 0 done syncing disks... All buffers synced. Uptime: 3m51s Rebooting... cpu_reset: Stopping other CPUs U-Boot 1.1.6-JNPR-2.3 (Build time: Apr 23 2012 - 04:00:06) SRX_240_HIGHMEM board revision major:2, minor:52, serial #: AAEV9178 OCTEON CN5230R-SCP pass 2.0, Core clock: 600 MHz, DDR clock: 333 MHz (666 Mhz data rate) DRAM: 1024 MB Starting Memory POST... Checking datalines... OK Checking address lines... OK Checking 512K memory for U-Boot... OK. Running U-Boot CRC Test... OK. Flash: 4 MB USB: scanning bus for devices... Root Hub 0: 4 USB Device(s) found Root Hub 1: 1 USB Device(s) found scanning bus for storage devices... 2 Storage Device(s) found Clearing DRAM........ done BIST check passed. 1:00:00.0 Vendor/Device ID = 0x811210b5 1:01:07.0 Vendor/Device ID = 0xc72414e4 Boot Media: nand-flash usb Net: octeth0 POST Passed Press SPACE to abort autoboot in 1 seconds ELF file is 32 bit Loading .text @ 0x8f000078 (246924 bytes) Loading .rodata @ 0x8f03c504 (13944 bytes) Loading .rodata.str1.4 @ 0x8f03fb7c (16776 bytes) Loading set_Xcommand_set @ 0x8f043d04 (100 bytes) Loading .rodata.cst4 @ 0x8f043d68 (20 bytes) Loading .data @ 0x8f044000 (5608 bytes) Loading .data.rel.ro @ 0x8f0455e8 (120 bytes) Loading .data.rel @ 0x8f045660 (136 bytes) Clearing .bss @ 0x8f0456e8 (11656 bytes) ## Starting application at 0x8f000078 ... Consoles: U-Boot console Found compatible API, ver. 2.3 FreeBSD/MIPS U-Boot bootstrap loader, Revision 2.3 (builder@evenath.juniper.net, Mon Apr 23 04:24:39 UTC 2012) Memory: 1024MB [0]Booting from nand-flash slice 1 Un-Protected 1 sectors writing to flash... Protected 1 sectors Loading /boot/defaults/loader.conf /kernel data=0xb096a4+0x1345dc syms=[0x4+0x8ae90+0x4+0xc9722] Hit [Enter] to boot immediately, or space bar for command prompt. Booting [/kernel]... Kernel entry at 0x801000e0 ... init regular console Primary ICache: Sets 64 Size 128 Asso 4 Primary DCache: Sets 1 Size 128 Asso 64 Secondary DCache: Sets 512 Size 128 Asso 8 GDB: debug ports: uart GDB: current port: uart KDB: debugger backends: ddb gdb KDB: current backend: ddb kld_map_v: 0x8ff80000, kld_map_p: 0x0 Copyright (c) 1996-2013, Juniper Networks, Inc. All rights reserved. Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. JUNOS 12.1X45-D15.5 #0: 2013-09-19 07:42:15 UTC builder@svl-junos-pool92.juniper.net:/volume/build/junos/12.1/service/12.1X45-D15.5/obj-octeon/juno s/bsd/kernels/JSRXNLE/kernel JUNOS 12.1X45-D15.5 #0: 2013-09-19 07:42:15 UTC builder@svl-junos-pool92.juniper.net:/volume/build/junos/12.1/service/12.1X45-D15.5/obj-octeon/juno s/bsd/kernels/JSRXNLE/kernel real memory = 1073741824 (1024MB) avail memory = 509661184 (486MB) FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs Security policy loaded: JUNOS MAC/pcap (mac_pcap) Security policy loaded: JUNOS MAC/runasnonroot (mac_runasnonroot) netisr_init: !debug_mpsafenet, forcing maxthreads from 4 to 1 cpu0 on motherboard : CAVIUM's OCTEON 52XX CPU Rev. 0.8 with no FPU implemented L1 Cache: I size 32kb(128 line), D size 8kb(128 line), sixty four way. L2 Cache: Size 512kb, 8 way obio0 on motherboard uart0: on obio0 uart0: console (9600,n,8,1) twsi0 on obio0 dwc0: on obio0 usb0: on dwc0 usb0: USB revision 2.0 uhub0: vendor 0x0000 DWC OTG root hub, class 9/0, rev 2.00/1.00, addr 1 uhub0: 1 port with 1 removable, self powered uhub1: vendor 0x0409 product 0x005a, class 9/0, rev 2.00/1.00, addr 2 uhub1: single transaction translator uhub1: 3 ports with 2 removable, self powered umass0: STMicroelectronics ST72682 High Speed Mode, rev 2.00/2.10, addr 3 umass1: Kingston DT Mini 10, rev 2.00/1.00, addr 4 dwc1: on obio0 usb1: on dwc1 usb1: USB revision 2.0 uhub2: vendor 0x0000 DWC OTG root hub, class 9/0, rev 2.00/1.00, addr 1 uhub2: 1 port with 1 removable, self powered cpld0 on obio0 pcib1: on obio0 Disabling Octeon big bar support PCIe: Waiting for port 0 to finish reset PCIe: Port 0 link active, 2 lanes PCIe: Waiting for port 1 to finish reset PCIe: Port 1 link active, 1 lanes pcib1: Initialized controller pci0: on pcib1 pcib2: irq 0 at device 0.0 on pci0 pci1: on pcib2 pci1: at device 2.0 (no driver attached) pci1: at device 7.0 (no driver attached) pcib0: on obio0 pci2: on pcib0 pci2: at device 0.0 (no driver attached) gblmem0 on obio0 octpkt0: on obio0 cfi0: on obio0 Timecounter "mips" frequency 600000000 Hz quality 0 ###PCB Group initialized for udppcbgroup ###PCB Group initialized for tcppcbgroup da0 at umass-sim0 bus 0 target 0 lun 0 da0: Removable Direct Access SCSI-2 device da0: 40.000MB/s transfers da0: 1000MB (2048000 512 byte sectors: 64H 32S/T 1000C) da1 at umass-sim1 bus 1 target 0 lun 0 da1: Removable Direct Access SCSI-2 device da1: 40.000MB/s transfers da1: 7634MB (15636304 512 byte sectors: 255H 63S/T 973C) Trying to mount root from ufs:/dev/da0s1a MFSINIT: Initialising MFSROOT Process-1 beginning MFSROOT initialization... Creating MFSROOT... /dev/md0: 20.0MB (40956 sectors) block size 16384, fragment size 2048 using 4 cylinder groups of 5.00MB, 320 blks, 640 inodes. super-block backups (for fsck -b #) at: 32, 10272, 20512, 30752 Populating MFSROOT... Creating symlinks... Setting up mounts... Continuing boot from MFSROOT... Attaching /cf/packages/junos via /dev/mdctl... Mounted junos package on /dev/md1... J Media check on da0 Automatic reboot in progress... ** /dev/da0s1a (NO WRITE) ** Last Mounted on / ** Root file system ** Phase 1 - Check Blocks and Sizes ** Phase 2 - Check Pathnames ** Phase 3 - Check Connectivity ** Phase 4 - Check Reference Counts ** Phase 5 - Check Cyl groups FREE BLK COUNT(S) WRONG IN SUPERBLK SALVAGE? no SUMMARY INFORMATION BAD SALVAGE? no BLK(S) MISSING IN BIT MAPS SALVAGE? no 150 files, 76647 used, 72879 free (47 frags, 9104 blocks, 0.0% fragmentation) mount reload of '/' failed: Operation not supported Verified junos signed by PackageProduction_12_1_0 Verified jboot signed by PackageProduction_12_1_0 veriexec: cannot update veriexec for /sbin/preinit-main: No such file or directory veriexec: cannot update veriexec for /sbin/init-mfs-root: No such file or directory veriexec: cannot update veriexec for /sbin/chroot: No such file or directory veriexec: cannot update veriexec for /sbin/settty: No such file or directory Verified junos-12.1X45-D15.5-domestic signed by PackageProduction_12_1_0 Checking integrity of BSD labels: s1: Passed s2: Passed s3: Passed s4: Passed ** /dev/bo0s3e FILE SYSTEM CLEAN; SKIPPING CHECKS clean, 12420 free (20 frags, 1550 blocks, 0.2% fragmentation) ** /dev/bo0s3f FILE SYSTEM CLEAN; SKIPPING CHECKS clean, 175297 free (25 frags, 21909 blocks, 0.0% fragmentation) Checking integrity of licenses: Checking integrity of configuration: rescue.conf.gz: No recovery data Loading configuration ... Time and ticks drifted too much, resetting synchronization... veriexec: fingerprint for dev 83951363, file 9 5055bac8936e03f3d0217786eee2f793d4555806 != 30b80ca176c3 5d86f14a8860c73721f1ca08d25c Generating RSA key /etc/ssh/ssh_host_key Generating public/private rsa1 key pair. Your identification has been saved in /etc/ssh/ssh_host_key. Your public key has been saved in /etc/ssh/ssh_host_key.pub. The key fingerprint is: bf:f4:12:7d:6b:70:7d:ac:8c:38:10:1a:5a:b0:80:b3 root@godnet The key's randomart image is: +--[RSA1 2048]----+ | . | |o . . | | o . o | |E . o . | | o oS. . o | | . . ... o o +| | .oo * o.| | .+o. = | | .o.. | +-----------------+ Generating DSA key /etc/ssh/ssh_host_dsa_key Generating public/private dsa key pair. Your identification has been saved in /etc/ssh/ssh_host_dsa_key. Your public key has been saved in /etc/ssh/ssh_host_dsa_key.pub. The key fingerprint is: 4b:98:54:20:5f:b9:4e:52:de:01:69:2a:3d:08:67:2b root@godnet The key's randomart image is: +--[ DSA 1024]----+ | . ..++ | | . oo o= . | | + +o= o . | | E +.=o+ . | | . .o=S | | ... | | . | | | | | +-----------------+ Generating RSA2 key /etc/ssh/ssh_host_rsa_key Generating public/private rsa key pair. Your identification has been saved in /etc/ssh/ssh_host_rsa_key. Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub. The key fingerprint is: 56:ec:33:df:66:ac:75:58:70:93:33:1f:26:a0:fe:b0 root@godnet The key's randomart image is: +--[ RSA 2048]----+ | . | | .. . .| | .o ..B.| | .o oo*| | So+ o| | . ++ o o | | E .. B .| | = . | | . | +-----------------+ Generating ECDSA key /etc/ssh/ssh_host_ecdsa_key Generating public/private ecdsa key pair. Your identification has been saved in /etc/ssh/ssh_host_ecdsa_key. Your public key has been saved in /etc/ssh/ssh_host_ecdsa_key.pub. The key fingerprint is: 7b:7c:63:0b:6c:60:bc:92:2d:29:87:23:c9:a7:36:be root@godnet The key's randomart image is: +--[ECDSA 256]---+ | | | | | | | . | | S | | . . . = * | | + = * + * + | | o+ + o o + o | root@godnet% show | show: Command not found. root@godnet% clearte Setting initial options: . Starting optional daemons: usbd. Doing initial network setup:. Initial interface configuration: additional daemons: eventd. Additional routing options:kern.module_path: /boot//kernel;/boot/modules -> /boot/modules;/modules/ifpf e_drv;/modules; kld netpfe drv: ifpfed_dialer. Doing additional network setup:. Starting final network daemons:. setting ldconfig path: /usr/lib /opt/lib starting standard daemons: cron. Initial rc.mips initialization:. Local package initialization:. starting local daemons:set cores for group access . kern.securelevel: -1 -> 1 Creating JAIL MFS partition... JAIL MFS partition created boot.upgrade.uboot="0xBFC00000" boot.upgrade.loader="0xBFE00000" Boot media /dev/da0 has dual root support ** /dev/da0s2a FILE SYSTEM CLEAN; SKIPPING CHECKS clean, 73391 free (47 frags, 9168 blocks, 0.0% fragmentation) Thu Jan 16 16:34:02 GMT+4 2014 godnet (ttyu0) login: root Password: --- JUNOS 12.1X45-D15.5 built 2013-09-19 07:42:15 UTC root@godnet% mount /dev/da0s1a on / (ufs, local, noatime, read-only) devfs on /dev (devfs, local, multilabel) /dev/md0 on /junos (ufs, local, noatime) /cf/packages on /junos/cf/packages (nullfs, local, noatime) devfs on /junos/cf/dev (devfs, local, noatime, multilabel) /dev/md1 on /junos (cd9660, local, noatime, read-only, verified) /cf on /junos/cf (nullfs, local, noatime) devfs on /junos/dev/ (devfs, local, noatime, noexec, read-only, multilabel) /cf/packages on /junos/cf/packages1 (nullfs, local, noatime) procfs on /proc (procfs, local, noatime) /dev/bo0s3e on /config (ufs, local, noatime) /dev/bo0s3f on /cf/var (ufs, local, noatime) /dev/md2 on /mfs (ufs, asynchronous, local, noatime) /cf/var/jail on /jail/var (nullfs, local, noatime) /cf/var/log on /jail/var/log (nullfs, local, noatime) devfs on /jail/dev (devfs, local, noatime, noexec, read-only, multilabel) /dev/md3 on /mfs/var/run/utm (ufs, asynchronous, local, noatime) /dev/md4 on /jail/mfs (ufs, asynchronous, local, noatime) root@godnet% root@godnet% root@godnet% reboot JWaiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `vnlru_mem' to stop...done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining...0 0 0 0 done syncing disks... All buffers synced. Uptime: 1h15m36s Rebooting... cpu_reset: Stopping other CPUs U-Boot 1.1.6-JNPR-2.3 (Build time: Apr 23 2012 - 04:00:06) SRX_240_HIGHMEM board revision major:2, minor:52, serial #: AAEV9178 OCTEON CN5230R-SCP pass 2.0, Core clock: 600 MHz, DDR clock: 333 MHz (666 Mhz data rate) DRAM: 1024 MB Starting Memory POST... Checking datalines... OK Checking address lines... OK Checking 512K memory for U-Boot... OK. Running U-Boot CRC Test... OK. Flash: 4 MB USB: scanning bus for devices... Root Hub 0: 4 USB Device(s) found Root Hub 1: 1 USB Device(s) found scanning bus for storage devices... 2 Storage Device(s) found Clearing DRAM........ done BIST check passed. 1:00:00.0 Vendor/Device ID = 0x811210b5 1:01:07.0 Vendor/Device ID = 0xc72414e4 Boot Media: nand-flash usb Net: octeth0 POST Passed Press SPACE to abort autoboot in 1 seconds ELF file is 32 bit Loading .text @ 0x8f000078 (246924 bytes) Loading .rodata @ 0x8f03c504 (13944 bytes) Loading .rodata.str1.4 @ 0x8f03fb7c (16776 bytes) Loading set_Xcommand_set @ 0x8f043d04 (100 bytes) Loading .rodata.cst4 @ 0x8f043d68 (20 bytes) Loading .data @ 0x8f044000 (5608 bytes) Loading .data.rel.ro @ 0x8f0455e8 (120 bytes) Loading .data.rel @ 0x8f045660 (136 bytes) Clearing .bss @ 0x8f0456e8 (11656 bytes) ## Starting application at 0x8f000078 ... Consoles: U-Boot console Found compatible API, ver. 2.3 FreeBSD/MIPS U-Boot bootstrap loader, Revision 2.3 (builder@evenath.juniper.net, Mon Apr 23 04:24:39 UTC 2012) Memory: 1024MB [0]Booting from nand-flash slice 1 Un-Protected 1 sectors writing to flash... Protected 1 sectors Loading /boot/defaults/loader.conf /kernel data=0xb096a4+0x1345dc syms=[0x4+0x8ae90+0x4+0xc9722] Hit [Enter] to boot immediately, or space bar for command prompt. Booting [/kernel]... Kernel entry at 0x801000e0 ... init regular console Primary ICache: Sets 64 Size 128 Asso 4 Primary DCache: Sets 1 Size 128 Asso 64 Secondary DCache: Sets 512 Size 128 Asso 8 GDB: debug ports: uart GDB: current port: uart KDB: debugger backends: ddb gdb KDB: current backend: ddb kld_map_v: 0x8ff80000, kld_map_p: 0x0 Copyright (c) 1996-2013, Juniper Networks, Inc. All rights reserved. Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. JUNOS 12.1X45-D15.5 #0: 2013-09-19 07:42:15 UTC builder@svl-junos-pool92.juniper.net:/volume/build/junos/12.1/service/12.1X45-D15.5/obj-octeon/junos/bsd/kernels/JSRXNLE/kernel JUNOS 12.1X45-D15.5 #0: 2013-09-19 07:42:15 UTC builder@svl-junos-pool92.juniper.net:/volume/build/junos/12.1/service/12.1X45-D15.5/obj-octeon/junos/bsd/kernels/JSRXNLE/kernel real memory = 1073741824 (1024MB) avail memory = 509661184 (486MB) FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs Security policy loaded: JUNOS MAC/pcap (mac_pcap) Security policy loaded: JUNOS MAC/runasnonroot (mac_runasnonroot) netisr_init: !debug_mpsafenet, forcing maxthreads from 4 to 1 cpu0 on motherboard : CAVIUM's OCTEON 52XX CPU Rev. 0.8 with no FPU implemented L1 Cache: I size 32kb(128 line), D size 8kb(128 line), sixty four way. L2 Cache: Size 512kb, 8 way obio0 on motherboard uart0: on obio0 uart0: console (9600,n,8,1) twsi0 on obio0 dwc0: on obio0 usb0: on dwc0 usb0: USB revision 2.0 uhub0: vendor 0x0000 DWC OTG root hub, class 9/0, rev 2.00/1.00, addr 1 uhub0: 1 port with 1 removable, self powered uhub1: vendor 0x0409 product 0x005a, class 9/0, rev 2.00/1.00, addr 2 uhub1: single transaction translator uhub1: 3 ports with 2 removable, self powered umass0: STMicroelectronics ST72682 High Speed Mode, rev 2.00/2.10, addr 3 umass1: Kingston DT Mini 10, rev 2.00/1.00, addr 4 dwc1: on obio0 usb1: on dwc1 usb1: USB revision 2.0 uhub2: vendor 0x0000 DWC OTG root hub, class 9/0, rev 2.00/1.00, addr 1 uhub2: 1 port with 1 removable, self powered cpld0 on obio0 pcib1: on obio0 Disabling Octeon big bar support PCIe: Waiting for port 0 to finish reset PCIe: Port 0 link active, 2 lanes PCIe: Waiting for port 1 to finish reset PCIe: Port 1 link active, 1 lanes pcib1: Initialized controller pci0: on pcib1 pcib2: irq 0 at device 0.0 on pci0 pci1: on pcib2 pci1: at device 2.0 (no driver attached) pci1: at device 7.0 (no driver attached) pcib0: on obio0 pci2: on pcib0 pci2: at device 0.0 (no driver attached) gblmem0 on obio0 octpkt0: on obio0 cfi0: on obio0 Timecounter "mips" frequency 600000000 Hz quality 0 ###PCB Group initialized for udppcbgroup ###PCB Group initialized for tcppcbgroup da0 at umass-sim0 bus 0 target 0 lun 0 da0: Removable Direct Access SCSI-2 device da0: 40.000MB/s transfers da0: 1000MB (2048000 512 byte sectors: 64H 32S/T 1000C) da1 at umass-sim1 bus 1 target 0 lun 0 da1: Removable Direct Access SCSI-2 device da1: 40.000MB/s transfers da1: 7634MB (15636304 512 byte sectors: 255H 63S/T 973C) Trying to mount root from ufs:/dev/da0s1a MFSINIT: Initialising MFSROOT Process-1 beginning MFSROOT initialization... Creating MFSROOT... /dev/md0: 20.0MB (40956 sectors) block size 16384, fragment size 2048 using 4 cylinder groups of 5.00MB, 320 blks, 640 inodes. super-block backups (for fsck -b #) at: 32, 10272, 20512, 30752 Populating MFSROOT... Creating symlinks... Setting up mounts... Continuing boot from MFSROOT... Attaching /cf/packages/junos via /dev/mdctl... Mounted junos package on /dev/md1... J Media check on da0 Automatic reboot in progress... ** /dev/da0s1a (NO WRITE) ** Last Mounted on / ** Root file system ** Phase 1 - Check Blocks and Sizes ** Phase 2 - Check Pathnames ** Phase 3 - Check Connectivity ** Phase 4 - Check Reference Counts ** Phase 5 - Check Cyl groups 150 files, 76647 used, 72879 free (47 frags, 9104 blocks, 0.0% fragmentation) mount reload of '/' failed: Operation not supported Verified junos signed by PackageProduction_12_1_0 Verified jboot signed by PackageProduction_12_1_0 veriexec: cannot update veriexec for /sbin/preinit-main: No such file or directory veriexec: cannot update veriexec for /sbin/init-mfs-root: No such file or directory veriexec: cannot update veriexec for /sbin/chroot: No such file or directory veriexec: cannot update veriexec for /sbin/settty: No such file or directory Verified junos-12.1X45-D15.5-domestic signed by PackageProduction_12_1_0 Checking integrity of BSD labels: s1: Passed s2: Passed s3: Passed s4: Passed ** /dev/bo0s3e FILE SYSTEM CLEAN; SKIPPING CHECKS clean, 12420 free (20 frags, 1550 blocks, 0.2% fragmentation) ** /dev/bo0s3f FILE SYSTEM CLEAN; SKIPPING CHECKS clean, 172329 free (41 frags, 21536 blocks, 0.0% fragmentation) Checking integrity of licenses: Checking integrity of configuration: rescue.conf.gz: No recovery data Loading configuration ... root@godnet% clearfted too much, resetting synchronization... veriexec: fingerprint for dev 83951363, file 9 5055bac8936e03f3d0217786eee2f793d4555806 != 30b80ca176c35d86f14a8860c73721f1ca08d25c mgd: commit complete Setting initial options: . Starting optional daemons: usbd. Doing initial network setup:. Initial interface configuration: additional daemons: eventd. Additional routing options:kern.module_path: /boot//kernel;/boot/modules -> /boot/modules;/modules/ifpfe_drv;/modules; kld netpfe drv: ifpfed_dialer. Doing additional network setup:. Starting final network daemons:. setting ldconfig path: /usr/lib /opt/lib starting standard daemons: cron. Initial rc.mips initialization:. Local package initialization:. starting local daemons:set cores for group access . kern.securelevel: -1 -> 1 Creating JAIL MFS partition... JAIL MFS partition created boot.upgrade.uboot="0xBFC00000" boot.upgrade.loader="0xBFE00000" Boot media /dev/da0 has dual root support ** /dev/da0s2a FILE SYSTEM CLEAN; SKIPPING CHECKS clean, 73391 free (47 frags, 9168 blocks, 0.0% fragmentation) Thu Jan 16 17:49:24 GMT+4 2014 godnet (ttyu0) login: root Password: --- JUNOS 12.1X45-D15.5 built 2013-09-19 07:42:15 UTC root@godnet% start shell start: Command not found. root@godnet% bootupgrade -u /boot/uboot -l /boot/loader Upgrading Loader... ##################################### Verifying the loader image... OK Upgrading U-Boot... ############################################################################### Verifying the new U-Boot image... OK WARNING: The new boot firmware will take effect when the system is rebooted. root@godnet% reboot JWaiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `vnlru_mem' to stop...done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining...0 0 0 0 done syncing disks... All buffers synced. Uptime: 10m37s Rebooting... cpu_reset: Stopping other CPUs U-Boot 1.1.6-JNPR-2.5 (Build time: Apr 2 2013 - 12:59:56) Initializing memory this may take some time... Measured DDR clock 333.28 MHz SRX_240_HIGHMEM board revision major:2, minor:52, serial #: AAEV9178 OCTEON CN5230R-SCP pass 2.0, Core clock: 600 MHz, DDR clock: 333 MHz (666 Mhz data rate) DRAM: 1024 MB Starting Memory POST... Checking datalines... OK Checking address lines... OK Checking 512K memory for U-Boot... OK. Running U-Boot CRC Test... OK. Flash: 4 MB USB: scanning bus for devices... Root Hub 0: 4 USB Device(s) found Root Hub 1: 1 USB Device(s) found scanning bus for storage devices... 2 Storage Device(s) found Clearing DRAM........ done BIST check passed. PCIe: Initializing port 0 PCIe: Initializing port 1 Boot Media: nand-flash usb Net: octeth0 BOARD NOT SUPPORTED BOARD NOT SUPPORTED Error: Broadcom Mini-Driver Kit Initialization failed POST Passed Press SPACE to abort autoboot in 1 seconds ELF file is 32 bit Loading .text @ 0x8f0000a0 (246560 bytes) Loading .rodata @ 0x8f03c3c0 (14144 bytes) Loading .reginfo @ 0x8f03fb00 (24 bytes) Loading .rodata.str1.4 @ 0x8f03fb18 (16516 bytes) Loading set_Xcommand_set @ 0x8f043b9c (96 bytes) Loading .rodata.cst4 @ 0x8f043bfc (20 bytes) Loading .data @ 0x8f044000 (5744 bytes) Loading .data.rel.ro @ 0x8f045670 (120 bytes) Loading .data.rel @ 0x8f0456e8 (136 bytes) Clearing .bss @ 0x8f045770 (11600 bytes) ## Starting application at 0x8f0000a0 ... Consoles: U-Boot console Found compatible API, ver. 2.5 FreeBSD/MIPS U-Boot bootstrap loader, Revision 2.5 (slt-builder@slt-junos15.juniper.net, Tue Apr 2 12:36:46 PDT 2013) Memory: 1024MB [0]Booting from nand-flash slice 1 Un-Protected 1 sectors writing to flash... Protected 1 sectors Loading /boot/defaults/loader.conf /kernel data=0xb096a4+0x1345dc syms=[0x4+0x8ae90+0x4+0xc9722] Hit [Enter] to boot immediately, or space bar for command prompt. Booting [/kernel]... Kernel entry at 0x801000e0 ... init regular console Primary ICache: Sets 64 Size 128 Asso 4 Primary DCache: Sets 1 Size 128 Asso 64 Secondary DCache: Sets 512 Size 128 Asso 8 GDB: debug ports: uart GDB: current port: uart KDB: debugger backends: ddb gdb KDB: current backend: ddb kld_map_v: 0x8ff80000, kld_map_p: 0x0 Copyright (c) 1996-2013, Juniper Networks, Inc. All rights reserved. Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. JUNOS 12.1X45-D15.5 #0: 2013-09-19 07:42:15 UTC builder@svl-junos-pool92.juniper.net:/volume/build/junos/12.1/service/12.1X45-D15.5/obj-octeon/junos/bsd/kernels/JSRXNLE/kernel JUNOS 12.1X45-D15.5 #0: 2013-09-19 07:42:15 UTC builder@svl-junos-pool92.juniper.net:/volume/build/junos/12.1/service/12.1X45-D15.5/obj-octeon/junos/bsd/kernels/JSRXNLE/kernel real memory = 1073741824 (1024MB) avail memory = 509661184 (486MB) FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs Security policy loaded: JUNOS MAC/pcap (mac_pcap) Security policy loaded: JUNOS MAC/runasnonroot (mac_runasnonroot) netisr_init: !debug_mpsafenet, forcing maxthreads from 4 to 1 cpu0 on motherboard : CAVIUM's OCTEON 52XX CPU Rev. 0.8 with no FPU implemented L1 Cache: I size 32kb(128 line), D size 8kb(128 line), sixty four way. L2 Cache: Size 512kb, 8 way obio0 on motherboard uart0: on obio0 uart0: console (9600,n,8,1) twsi0 on obio0 dwc0: on obio0 usb0: on dwc0 usb0: USB revision 2.0 uhub0: vendor 0x0000 DWC OTG root hub, class 9/0, rev 2.00/1.00, addr 1 uhub0: 1 port with 1 removable, self powered uhub1: vendor 0x0409 product 0x005a, class 9/0, rev 2.00/1.00, addr 2 uhub1: single transaction translator uhub1: 3 ports with 2 removable, self powered umass0: STMicroelectronics ST72682 High Speed Mode, rev 2.00/2.10, addr 3 umass1: Kingston DT Mini 10, rev 2.00/1.00, addr 4 dwc1: on obio0 usb1: on dwc1 usb1: USB revision 2.0 uhub2: vendor 0x0000 DWC OTG root hub, class 9/0, rev 2.00/1.00, addr 1 uhub2: 1 port with 1 removable, self powered cpld0 on obio0 pcib1: on obio0 Disabling Octeon big bar support PCIe: Waiting for port 0 to finish reset PCIe: Port 0 link active, 2 lanes PCIe: Waiting for port 1 to finish reset PCIe: Port 1 link active, 1 lanes pcib1: Initialized controller pci0: on pcib1 pcib2: irq 0 at device 0.0 on pci0 pci1: on pcib2 pci1: at device 2.0 (no driver attached) pci1: at device 7.0 (no driver attached) pcib0: on obio0 pci2: on pcib0 pci2: at device 0.0 (no driver attached) gblmem0 on obio0 octpkt0: on obio0 cfi0: on obio0 Timecounter "mips" frequency 600000000 Hz quality 0 ###PCB Group initialized for udppcbgroup ###PCB Group initialized for tcppcbgroup da1 at umass-sim1 bus 1 target 0 lun 0 da1: Removable Direct Access SCSI-2 device da1: 40.000MB/s transfers da1: 7634MB (15636304 512 byte sectors: 255H 63S/T 973C) da0 at umass-sim0 bus 0 target 0 lun 0 da0: Removable Direct Access SCSI-2 device da0: 40.000MB/s transfers da0: 1000MB (2048000 512 byte sectors: 64H 32S/T 1000C) Trying to mount root from ufs:/dev/da0s1a MFSINIT: Initialising MFSROOT Process-1 beginning MFSROOT initialization... Creating MFSROOT... /dev/md0: 20.0MB (40956 sectors) block size 16384, fragment size 2048 using 4 cylinder groups of 5.00MB, 320 blks, 640 inodes. super-block backups (for fsck -b #) at: 32, 10272, 20512, 30752 Populating MFSROOT... Creating symlinks... Setting up mounts... Continuing boot from MFSROOT... Attaching /cf/packages/junos via /dev/mdctl... Mounted junos package on /dev/md1... J Media check on da0 Automatic reboot in progress... ** /dev/da0s1a (NO WRITE) ** Last Mounted on / ** Root file system ** Phase 1 - Check Blocks and Sizes ** Phase 2 - Check Pathnames ** Phase 3 - Check Connectivity ** Phase 4 - Check Reference Counts ** Phase 5 - Check Cyl groups 150 files, 76647 used, 72879 free (47 frags, 9104 blocks, 0.0% fragmentation) mount reload of '/' failed: Operation not supported Verified junos signed by PackageProduction_12_1_0 Verified jboot signed by PackageProduction_12_1_0 veriexec: cannot update veriexec for /sbin/preinit-main: No such file or directory veriexec: cannot update veriexec for /sbin/init-mfs-root: No such file or directory veriexec: cannot update veriexec for /sbin/chroot: No such file or directory veriexec: cannot update veriexec for /sbin/settty: No such file or directory Verified junos-12.1X45-D15.5-domestic signed by PackageProduction_12_1_0 Checking integrity of BSD labels: s1: Passed s2: Passed s3: Passed s4: Passed ** /dev/bo0s3e FILE SYSTEM CLEAN; SKIPPING CHECKS clean, 12420 free (20 frags, 1550 blocks, 0.2% fragmentation) ** /dev/bo0s3f FILE SYSTEM CLEAN; SKIPPING CHECKS clean, 172278 free (70 frags, 21526 blocks, 0.0% fragmentation) Checking integrity of licenses: Checking integrity of configuration: rescue.conf.gz: No recovery data Loading configuration ... Time and ticks drifted too much, resetting synchronization... veriexec: fingerprint for dev 83951363, file 9 5055bac8936e03f3d0217786eee2f793d4555806 != 30b80ca176c35d86f14a8860c73721f1ca08d25c mgd: commit complete Setting initial options: . Starting optional daemons: usbd. Doing initial network setup:. Initial interface configuration: additional daemons: eventd. Additional routing options:kern.module_path: /boot//kernel;/boot/modules -> /boot/modules;/modules/ifpfe_drv;/modules; kld netpfe drv: ifpfed_dialer. Doing additional network setup:. Starting final network daemons:. setting ldconfig path: /usr/lib /opt/lib starting standard daemons: cron. Initial rc.mips initialization:. Local package initialization:. starting local daemons:set cores for group access . kern.securelevel: -1 -> 1 Creating JAIL MFS partition... JAIL MFS partition created boot.upgrade.uboot="0xBFC00000" boot.upgrade.loader="0xBFE00000" Boot media /dev/da0 has dual root support ** /dev/da0s2a FILE SYSTEM CLEAN; SKIPPING CHECKS clean, 73391 free (47 frags, 9168 blocks, 0.0% fragmentation) Thu Jan 16 18:01:08 GMT+4 2014 godnet (ttyu0) login: umass1: at uhub1 port 2 (addr 4) disconnected (da1:umass-sim1:1:0:0): lost device (da1:umass-sim1:1:0:0): removing device entry umass1: detached