View Only
last person joined: 3 days ago 

Ask questions and share experiences about ACX Series, CTP Series, MX Series, PTX Series, SSR Series, JRR Series, and all things routing, including portfolios and protocols.

If you have a question or a use case, likely there are others who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge! Post here or in the vMX community. 

Need additional guidance?  Check out these Juniper Resources.

Documentation Technical Bulletins Knowledge Base Day One Books

Latest Discussion Posts

  • Ciao @aaron.gould Many thanks for your answer! I appreciated it and shared with my engineering staff to cherish your experience, and be prepared to support our customer. Thanks a million again. best regards Massimiliano ------------------------------ ...

  • hello everyone. i have a strange problem on an MX240 with MPC 3D 16x 10GE. this router run full internet table feed and 1 IXP with remote EVPN customer that share IXP port remotely. i know for sure that this FPC at 100% derive from EVPN, but ...

  • @Eduardo Lopes de Haro It was very clear, thank you very much!!! ------------------------------ TARCISIO OLIVEIRA ------------------------------

  • Hi Tarcisio, yes, default bandwidth value is zero if you don't configure it, here is the reference: The default approach ...

    1 person recommends this.
  • @Eduardo Lopes de Haro , thanks for the answer! By default, on the facility backup with auto-bandwidth scenario, the sum of the individual LSPs bandwidth that is protected by a single bypass LSP isn't considered, right? Regard to LSP optimization based ...

  • Hi Tarcisio, Juniper routers support two ways of fast reroute protection just as described in RFC 4090, being one-to-one backup or facility backup (many-to-one), which could be used to different scenarios and purposes. In Junos naming, one-to-one ...

    1 person recommends this.
  • Greetings. I suggest, starting with the fundaments. Best e-gards, Georgi Sinapov Core Network Architect


  • AI-Driven Support via JSI

    Get AI-driven support by connecting your devices to Juniper Support Insights (JSI). Join one of our upcoming “Jumpstart JSI Ask the Experts” meetups to learn more about JSI and ask the panel of experts your questions. Select the session that best suits your schedule:

    Tuesday, June 25 from 8:00-8:45PM PT: Register Now
    Wednesday, June 26 from 8:00-8:45AM PT: Register Now

Unanswered Posts

Top Contributors in the Community