Routing

 View Only

If you have a question or a use case, likely there are others who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge! Post here or in the vMX community. 

Need additional guidance?  Check out these Juniper Resources.

Ask AI Documentation Technical Bulletins Knowledge Base Day One Books

Latest Discussions

  • Profile Picture

    MX480 MPC10E: FPC0/FPC1 crash with CHASSISD_FPC_ASIC_ERROR ...

    By Anonymous , 6 days ago

    This message was posted by a user wishing to remain anonymous Hi all, I encountered a strange issue on an MX480 and would like to ask whether anyone has seen something similar. Device information: Platform: MX480 MPC: MPC10E Junos: 23.4R2-S3.9 ...

  • Profile Picture

    RE: JNCIE-SP Workbook and Lab Initial Configs IGP ...

    By Ricardo Simba , 7 days ago

    Thanks Daniel. Yes, it is the JNCIE-SP :) and I'm sure they'll have them fixed soon. ------------------------------ Ricardo Simba ------------------------------

  • Profile Picture

    mx301 Tranceiver Question on JNP-QSFP-40G-LX4

    By MICHAEL B , 8 days ago

    Good day all, We are going to purchase some mx301s and I notice using the hardware compatibility checker this JNP-QSFP-40G-LX4 in Not listed as supported. It is for the mx204. I understand the mx301 was just released. I was gambling to use 40GE MMF ...

  • Profile Picture

    RE: Real-world effectiveness of SR-TE + PCE for autonomous ...

    By Anton Elita , 8 days ago

    (please excuse the bias, as I come from the vendor side). Hi Guilherme, # if you're after a distributed approach for bandwidth management, a proven and scalable way is to use RSVP-TE with: - auto-bandwidth - container LSPs - on-demand ...

  • Profile Picture

    RE: JNCIE-SP Workbook and Lab Initial Configs IGP ...

    By DANIEL NG , 10 days ago

    are you sure it is JNCIE-SP and not DC? regardless, the JNCIE-SP study bundle is currently full of errors. i've helped proofreading it and juniper says they will address the issues in the next update. dm me for details if you want. ------------------------------ ...

  • Profile Picture

    RE: RPKI validation problem

    By JOSE RESTAINO , 11 days ago

    Thanks for your kindly response. Yesterday i also open a ticket with my local Juniper partner, Juniper TAC says that it´s probable that my router is affected by the Problem Report PR1865114. We will try to upgrade the Junos Version. Thanks ...

  • Profile Picture

    mx301 Tranceiver Question, support of the JNP-QSF ...

    By MICHAEL B , 11 days ago

    Can anyone chime in if this 40GE qsfp+ will be supported on the platform ? I noticed it is NOT listed in the hardware compatibility tool. Why? We were planning 2 pairs of routers in 2 different rooms separated by OM4 MMF fiber runs terminated on LC-to-LC ...

Announcements

  • HPE + Juniper: Leading the Convergence of AI and networking

    By: Jodi Meier Jodi Meier , 10 months ago

    Juniper Networks is now part of HPE. Together, we’re building industry-leading, secure, AI-native networks – purpose-built with and for AI. As AI and networking converge, we’re driving a bold transformation across enterprises, service providers, and cloud operators. 

Unanswered Posts

  • MX480 MPC10E: FPC0/FPC1 crash with CHASSISD_FPC_ASIC_ERROR ...

  • mx301 Tranceiver Question on JNP-QSFP-40G-LX4

  • mx301 Tranceiver Question, support of the JNP-QSF ...

  • EVPN-VPWS SETUP Between Juniper and Cisco

  • QinQ VPLS fundamental Issues Not discussed

  • DS-Lite with PCP not working on MS-MIC

  • RSVP LSP vs LDP Route Preference Behavior in Junos