Routing

 View Only
last person joined: 5 days ago 

Ask questions and share experiences about ACX Series, CTP Series, MX Series, PTX Series, SSR Series, JRR Series, and all things routing, including portfolios and protocols.

If you have a question or a use case, likely there are others who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge! Post here or in the vMX community. 

Need additional guidance?  Check out these Juniper Resources.

Ask AI Documentation Technical Bulletins Knowledge Base Day One Books

Latest Discussion Posts

  • Profile Picture

    EX4550 high CPU Process

    By: Hoang Nguyen , 5 days ago

    Hi all, I have issue with EX4550, process sfid and ppmd consume most of the CPU resource, and I check log message have log : ESWD_PPM_WRITE_ERROR: ppm_send: write error on pipe to ppmd (Resource temporarily unavailable). How to reduce the CPU ...

  • Profile Picture

    MPLS | FRR | Cisco | Juniper | Compatibility

    By: Anonymous , 7 days ago

    This message was posted by a user wishing to remain anonymous I have the following scenario and need your guidance on enabling a detour within Juniper to ensure seamless switchover for LSPs originating and terminating on Cisco devices. PFB topology ...

  • Profile Picture

    RE: Process Update for Juniper RMAs - How do I return ...

    By: Jodi Meier , 8 days ago

    Juniper continues to improve and automate support options. We're excited to introduce a new AI-driven RMA self-service tool on the Juniper Support Portal. This new tool seamlessly incorporates into the current case opening workflow and enhances our existing ...

  • Profile Picture

    RE: EBGP as replacement for WAN IGP say OSPF

    By: TUAN PHAM , 10 days ago

    Generally, It's good to used BGP to replace OSPF. And I will recommend to use BGP. You will have some advantages: Unicast peering, cause OSPF uses multicast, it has some certain risks and bandwidth consumption (not much but it's still there compare ...

  • Profile Picture

    RE: SR, source-routing-path-template, l2circuit

    By: Andrei Cebotareanu , 10 days ago

    Hi, I am sure you will like it: https://community.juniper.net/blogs/anton-elita/2023/01/18/service-mapping-to-colored-mpls-paths BR ------------------------------ Andrei Cebotareanu ------------------------------

  • Profile Picture

    Routing Issue with VRF Configuration on Juniper Ro ...

    By: Mostafa Nabil , 11 days ago

    Hi everyone, I'm experiencing issues with route exchange on two Juniper routers set up with a VRF named AVM. Despite proper configuration, the expected routes aren't appearing in the VRF routing tables, particularly for interfaces ae7.268, ae0.509, ...

  • Profile Picture

    RE: SR, source-routing-path-template, l2circuit

    By: JUN XU , 11 days ago

    Hi Bro: I'm trying the same problem as you, can I ask if you've solved this one already? ------------------------------ JUN XU ------------------------------

Announcements

  • Tell us if you've upgraded or if you need help upgrading!

    Complete this three-question survey to help us identify where you are in your upgrade journey.

Unanswered Posts

  • EX4550 high CPU Process

  • MPLS | FRR | Cisco | Juniper | Compatibility

  • Routing Issue with VRF Configuration on Juniper Ro ...

  • Deterministic NAT on MS-MPC and logging for port block ...

  • EVPN MPLS Confusion

  • Inter-AS SRv6 on an ASBR that is also a PE...

  • What feature in Juniper QFX5120 that similar with split-horizon ...

Top Contributors in the Community