Routing

 View Only
last person joined: 2 days ago 

Ask questions and share experiences about ACX Series, CTP Series, MX Series, PTX Series, SSR Series, JRR Series, and all things routing, including portfolios and protocols.

If you have a question or a use case, likely there are others who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge! Post here or in the vMX community. 

Need additional guidance?  Check out these Juniper Resources.

Documentation Technical Bulletins Knowledge Base Day One Books

Latest Discussion Posts

  • Profile Picture

    Pause Frame Handling on Junos

    By: Sampurna Pattnaik , 3 hours ago

    I would like to understand how does a Junos Device handle pause frames that is sent by a peer device (can be Juniper or other vendor) Are there any known caveats or inter-op issues which can be seen when a 3rd party device is connected to Juniper ...

  • Profile Picture

    RE: Question on the inet.1 table

    By: spuluka , 17 hours ago

    The inet.1 table is primarily where the multicast routes are stored and used for active requests by multicast participants. https://www.juniper.net/documentation/us/en/software/junos/cli-reference/topics/ref/command/show-multicast-route.html ------------------------------ ...

  • Profile Picture

    Question on the inet.1 table

    By: djadhav , yesterday

    Hi all. The inet.1 table is used to record the S,G values of incoming packets that have passed the RPC check. Is the inet.1 table used for further RPF checks of the rest of the packets of the same S,G stream, or is the inet.1 table purely informational? ...

  • Profile Picture

    Segment routing: What is the purpose of announcing ...

    By: LEEBAHI , 2 days ago

    Hi guys, I noticed in segment routing , a router will advertise multiple segments blocks. Why do we need to announce multiple node segment blocks ? Much appreciated!! ------------------------------ Be kind!! -------------------------- ...

  • Profile Picture

    RE: EVPN-MPLS dual home without using ESI-LAG?

    By: PER GRANATH , 2 days ago

    It's ESI-LAG without LACP. ------------------------------ PER GRANATH ------------------------------

  • Profile Picture

    RE: EVPN-MPLS dual home without using ESI-LAG?

    By: kronicklez , 2 days ago

    Hi, Noted. Thanks for the url. Thanks

  • Profile Picture

    RE: EVPN-MPLS dual home without using ESI-LAG?

    By: PER GRANATH , 2 days ago

    https://www.juniper.net/documentation/us/en/software/junos/evpn/topics/task/evpn-multihoming-configuring.html ------------------------------ PER GRANATH ------------------------------

Announcements

  • Introducing Juniper Support Portal (JSP) Mobile App for iOS

    The Juniper Support Portal (JSP) Mobile App is now available for customer use on iOS platforms. The app is designed to provide mobile access for on-the-go service support. 

    What’s available?

    • Live Chat Support
    • Instant Notifications
    • Knowledge Base Access 

Unanswered Posts

  • Pause Frame Handling on Junos

  • Segment routing: What is the purpose of announcing ...

  • Evpn-vxlan Stitching using MAC-VRF with Gateway interconnect ...

  • COS: What is buffer-delay rate?

  • NTP server x.x.x.x prefer

  • BGP Flow spec: How to view dynamic filter

  • Implementing LSP Container in Viettel Network

Top Contributors in the Community