Routing

 View Only
last person joined: yesterday 

Ask questions and share experiences about ACX Series, CTP Series, MX Series, PTX Series, SSR Series, JRR Series, and all things routing, including portfolios and protocols.

If you have a question or a use case, likely there are others who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge! Post here or in the vMX community. 

Need additional guidance?  Check out these Juniper Resources.

Ask AI Documentation Technical Bulletins Knowledge Base Day One Books

Latest Discussion Posts

  • Profile Picture

    Ipv6 flowspec

    By: Gary Rubel , 5 days ago

    hello, Does someone have a good config for IPv6 flowspec using a IPv4 bgp peer only? The customer is using a routing-instance to the arbor so a rib-group will need to be created. set routing-options rib-groups ipv6-flowspec import-rib [ inet6.0 inet6-flow.0 ...

  • Profile Picture

    RE: Router MX480

    By: Grzegorz Dacka , 13 days ago

    Hello Okay, but what question did you want to ask? What do you want to achieve? What should the network configuration look like? I didn't understand anything from what you wrote. ------------------------------ -- Grzegorz Dacka -------------- ...

  • Profile Picture

    Router MX480

    By: Riccardo enzo , 14 days ago

    Hi! I will soon buy an MX 480 to virtualise and create virtual routers with VMs, and I will soon buy four 72-bay dual 2x EPYC servers with 1 TB of DDR4 RAM and a larger number of 3.5-inch HDDs to create more VMs with VM Esxi. I know that MX 480 creates ...

  • Profile Picture

    dataplane traffic capture to a local pcap file on ...

    By: steve antoniadis , 14 days ago

    Hi I like to capture dataplane traffic on an mx10004, from a certain interface. Then store in to a local file on the juniper, download it and view it with wireshark. port-mirroring to a local file does not seem to work. does anybody have an ...

  • Profile Picture

    RE: Juniper CGNAT not releasing sessions on port-block ...

    By: JONATHAN LEWIS , 14 days ago

    I'm currently investigating the same issue, and found your post. Quite some time ago, JTAC had us change our PBA active-block-timeout to 0, but I still see many customer IPs sparsely using most or all of their possible port-blocks, much like the above. ...

  • Profile Picture

    L2VPN not working, what I'm doing wrong

    By: xine32 , one month ago

    Hi, I'm currently studdying for JNCIP-SP exam, and I'm also pretty new with all L2/L3 VPN stuff.... For my studdy I'm using Juniper V-lab, for the current lab I used the lab named "BGP - Multi-AS with Dual Route Reflectors". (I have attached ...

  • Profile Picture

    RE: encapsulation dix in encapsulation flexible-et ...

    By: DANIEL NG , one month ago

    apparently the vlan id is tagged since encapsulation flexible-ethernet-services requires flexible-vlan-tagging, which in term requires a vlan id. however, you can use encapsulation dix without vlan id when you don't have encapsulation flexible-ethernet-services. ...

Announcements

  • HPE + Juniper: Leading the Convergence of AI and networking

    Juniper Networks is now part of HPE. Together, we’re building industry-leading, secure, AI-native networks – purpose-built with and for AI. As AI and networking converge, we’re driving a bold transformation across enterprises, service providers, and cloud operators. 

Unanswered Posts

  • Ipv6 flowspec

  • dataplane traffic capture to a local pcap file on ...

  • L2VPN not working, what I'm doing wrong

  • Question on dynamic firewall preference

  • BGP EVPN T2 route next-hop handling with E-BGP nei ...

  • Assistance Required: Juniper Firewall HA Failover Behavior ...

  • Question on subscriber interface 'mac-validate loo ...

Top Contributors in the Community