Security

 View Only
last person joined: yesterday 

Ask questions and share experiences with Juniper Connected Security. Discuss Advanced Threat Protection, SecIntel, Secure Analytics, Secure Connect, Security Director, and all things related to Juniper security technologies.

If you have a question or a use case, likely there are others who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge! Post here or access the following resources: 

Documentation SRX Community Juniper Threat Labs Security Advisories

Latest Discussion Posts

  • Elevate Community & Juniper Customers: Here at Juniper, we recognize upgrading your SRX can be a challenging and delicate process. For this reason, we developed the SRX Upgrade Guide documentation to assist you. This guide has you covered from what ...

    1 person recommends this.
  • We recently made a few notable changes in Juniper's Global RMA Return Instructions . We aim to educate and align our customers on properly returning their Juniper defective equipment. Key changes to the Juniper's Global RMA process include: Defective ...

  • Resolved! I'd missed that on the port group on ESXi I needed to set it to allow MAC-changes. Changing that on the VLAN that I'm using for fabric fixed it. ------------------------------ Adam Phillips ------------------------------

  • Profile Picture

    SRX HA pair on ESXi

    Hi, Hoping I could get some help after spending a very unproductive day on this. I've set up 2 vSRXs on ESXi (version 7) both have 5 interfaces assigned to them. I've configured them for a HA pair. which they seem to be in, however the data plane ...

  • Profile Picture

    QinQ ISP configuration

    Hi guys, first time posting here, so let me start by thanking for being a great community and helping me multiple times while sitting in the shadows :D My internet was delivered and informed to configure it with C-VLAN:301 and S-VLAN:504, so I've ...

  • You don't. JunOS is not a Linux or BSD distribution. You can't update elements inside. That simple. ------------------------------ Olivier Benghozi ------------------------------

  • Profile Picture

    How to Update OpenSSH

    So I am trying to figure out how (if possible) to update the openSSH version on a juniper ex-4300 series. The device is currently on OpenSSH Version 7.5 and trying to get it to a higher version. If possible, would I have to install in order ex:(7.6 , ...

Announcements

  • Juniper SRX Upgrade Guide.

    Upgrading your SRX can be a challenging and delicate process. For this reason, we developed the SRX Upgrade Guide documentation to assist you. This guide has you covered from what steps to take before considering an upgrade to how to best leverage new features in the upgrade and all of the questions in between.

Unanswered Posts

  • 1 person recommends this.

Top Contributors in the Community