Security

 View Only
last person joined: 3 days ago 

Ask questions and share experiences with Juniper Connected Security. Discuss Advanced Threat Protection, SecIntel, Secure Analytics, Secure Connect, Security Director, and all things related to Juniper security technologies.

If you have a question or a use case, likely there are others who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge! Post here or access the following resources: 

Documentation SRX Community Juniper Threat Labs Security Advisories

Latest Discussion Posts

  • Elevate Community & Juniper Customers: Here at Juniper, we recognize upgrading your SRX can be a challenging and delicate process. For this reason, we developed the SRX Upgrade Guide documentation to assist you. This guide has you covered from what ...

    1 person recommends this.
  • Profile Picture

    Screen OS

    Hi all, I am currently working with a Juniper SSG-35M in my environment, where I have configured an IPSec tunnel to a third-party vendor. However, I keep receiving the following error message: "Attack alarm: IKE first message DoS attack on interface ...

  • Hi everyone, I am wondering if there is any command to view dynamic filter that is created as a result of receiving BGP flow spec route. For example: Below EM-EXT-SW has created a dynamic filter " __flowspec_default_inet__" As per Juniper, it ...

  • So it sounds like the primary routing for the site would always use ip2 while you want the VPN to override this and use ip1 instead. So I would setup the routing override using KB above that would setup match criteria for UDP 500 and a destination ip ...

  • Sadly, I can't open the site you sent; it says the site is temporarily unavailable. (I'll check it later.) I'm trying to clarify the issue I'm facing since you mentioned that you're not sure you fully understand the problem: Most of the time, I don't ...

  • I'm not sure I follow the whole issue, but it sounds like you might be able to use the source based routing option for this problem. This will use the criteria of the source address to select the routing path and can also be combined with destination ...

  • Hi all, I'm managing a site-to-site VPN for one of our clients, and I've run into an unusual routing issue that I'm hoping someone here can help with. The setup is such that, unlike other clients, this one requires a specific static route to get the ...

Unanswered Posts

  • 1 person recommends this.

Top Contributors in the Community