vMX

On eveng for it to work, you need to configure a MAC address for the aex (system-id) and force it up. The images have the same MAC for the ae0 interface and by ricochet the same system-id for LACP… It doesn't seem to work that way, unless you change ...

On eveng for it to work, you need to configure a MAC address for the aex (system-id) and force it up. The images have the same MAC for the ae0 interface and by ricochet the same system-id for LACP… It doesn't seem to work that way, unless you change ...

Hi , am using 2 directly connected VQFXPFE-RE on EVE-NG for testing purpose. bu am not able to ping directly connected nodes. The basic info is mentioned below:- ********************************************************** root@VQFQ-Test01> show ...

Hello All, am trying to run VQFX on EVE-NG but not able to work properly., am not to see physical interface on chasis. Thanks in advance for your feedback . root@vqfx-re> show virtual-chassis status Virtual Chassis ID: 7646.bcdd.068c Virtual ...

Hi there, I'd like to seek guideline how to configure time base filter on MX/Juniper. My purpose is limit bandwidth for specific customer 7am to 5pm to 10mbps, and default 20mbps. Appreciate for your recommend. Channith

Hello, I am running a small VXLAN-EVPN deployment with 2 vMXs running as EVPN L3 Gateways. I am wanting to use Anycast gateways but the "virtual-gateway-accept-data" seems to be missing from the syntax? tom@spine_01# set interfaces irb unit 100 ...

Here it is... VRFUSED.inet.0: 15650 destinations, 28753 routes (15649 active, 1 holddown, 0 hidden) 10.10.0.0/15 (2 entries, 1 announced) TSI: KRT in-kernel 10.10.0.0/15 -> {indirect(1048604)} Page 0 idx 0, (group vRR type External) Type 1 val 0x12709b48 ...