Routing

 View Only
last person joined: yesterday 

Ask questions and share experiences about ACX Series, CTP Series, MX Series, PTX Series, SSR Series, JRR Series, and all things routing, including portfolios and protocols.

If you have a question or a use case, likely there are others who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge! Post here or in the vMX community. 

Need additional guidance?  Check out these Juniper Resources.

Technical Bulletins Knowledge BaseDay One+

Latest Discussion Posts

  • Profile Picture

    RE: Dynamic-Tunnel LSP w/fast-reroute

    By: spuluka , 22 hours ago

    I believe you need to add the protection revert timer to the configuration as outlined here. https://www.juniper.net/documentation/us/en/software/junos/mpls/topics/ref/statement/protection-revert-time-edit-protocols-mpls-interface-static.html ------------------------------ ...

  • Profile Picture

    Dynamic-Tunnel LSP w/fast-reroute

    By: dpoehls , yesterday

    Hello, I'm using a template for dynamic-tunnel (here is the template): label-switched-path lsp-template-ad-frr { template; adaptive; fast-reroute; } And here is the use of that template under routing-options: dynamic-tunnels ...

  • Profile Picture

    RE: SRX PBR (or FBF) for retrurn static routing

    By: Sheetanshu , yesterday

    In the below firewall filter, swap the source and the destination address. Also apply the firewall filter on the interface ge-0/0/1 rather than ge-0/0/0 set firewall family inet filter PBF-Filter term 2 from source-address 10.239.10.11/32 set firewall ...

  • Profile Picture

    RE: SRX PBR (or FBF) for retrurn static routing

    By: OUSMANE NATHA DIARRA , yesterday

    Hi, I put a lab for the test I want the traffic to take the greed colort >Config root@vSRX> show configuration | display set set version 21.3R1.9 set system host-name vSRX set system root-authentication encrypted-password "$6$zJw2kymY$ghxn/3jlZGMFY6xCGcSQmMUeVZ9oyKh3Kddlod.TyTS3uufl9sa10TAT67a8YlNhp7cum2.1k.B9UDSC11FJQ1" ...

  • Profile Picture

    RE: CSPF Computation Failed

    By: Jorge Quinones , yesterday

    Thank you for the fast response, I appreciate it so much. ------------------------------ Jorge Quinones ------------------------------

  • Profile Picture

    RE: SRX PBR (or FBF) for retrurn static routing

    By: Sheetanshu , yesterday

    Thanks. Can you please share the output of "show route 10.232.0.132" from the SRX? It looks like the SRX has a better route to reach to 10.232.0.132/32 via 10.172.98.6 as compared with 10.172.99.14. Regards ------------------------------ Sheetanshu ...

  • Profile Picture

    RE: SRX PBR (or FBF) for retrurn static routing

    By: OUSMANE NATHA DIARRA , yesterday

    Explaination : when the packet is initiating from ip 10.232.0.132/32 locate on vsys internet to the ip 10.172.19.15 behind the SRX via reth0.600, the return packet is going toward reth0.910 instead of reth0.600. I would like the return trafic to ...

Announcements

Unanswered Posts

  • BGP OVER IPSEC SOLUTION WITH AWS AND SRX5800

  • PACKET LOSS ON A SECURE TUNNEL P2P IP ( JUNIPER AND ...

  • MPLS L3VPN TTL problem

  • Question on Segment Routing Shared Fate Groups

  • Question on Segment Routing L-OSPF Route Protocol ...

  • P2MP traffic loss over QFX and EX series

  • dhcpv6 relay and demux0

Top Contributors in the Community