Routing

 View Only
last person joined: yesterday 

Ask questions and share experiences about ACX Series, CTP Series, MX Series, PTX Series, SSR Series, JRR Series, and all things routing, including portfolios and protocols.

If you have a question or a use case, likely there are others who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge! Post here or in the vMX community. 

Need additional guidance?  Check out these Juniper Resources.

Documentation Technical Bulletins Knowledge Base Day One Books

Latest Discussion Posts

  • Hi all, I'm see this url https://www.juniper.net/documentation/us/en/software/junos/cos/topics/example/tunnel-cos-example-cos-config-guide.html is it just need to configure at one side only?The current device in my network was MX480 and MX240. The ...

  • Hi, I'm using an MX204 with JunOS 22.2R3-S2.8 and I need to enable BGP load sharing on my crosslink which uses iBGP. When I started lab testing I couldn't manage to do it, then I found this documentations which describes the " allow-external-internal" ...

  • Profile Picture

    RE: OSPPF LSA

    The LSA in the last output is from the "View of R1". However the originating router (Adv Rtr) is 192.168.40.1 which is R5. ------------------------------ SCOTT AITKEN ------------------------------

  • Profile Picture

    OSPPF LSA

    Hi, I'm currently studdying for my JNCIP-SP certification. In the Juniper self training material I understood that the presence of the asterix " * " in the LSA when using "show ospf database router|external|network|"and so on" extensive" command ...

  • Hi All, Can someone verify whether the config translate MAC-VRF that from ACX to MX is correct or not? Because it not work after i convert to MX. ACX config routing-instances { evpn_group_90_700 { instance-type mac-vrf; ...

  • Hi, I started learny JNCIS-SP certification. Has I remember, last time I did my time I did my CCNP, an interface can't belong more than one interface, it can be a feature added after 2016 maybe but doesn't matters. I seen now, it somethings been standardized ...

  • Cisco has this command: router ospf 1 log-adjacency-changes detail Is there a Junos equivalent? I've added all these traps under additional CLI in Mist but don't see anything for logging adjacency changes. set system services ssh root-login ...

Announcements

Unanswered Posts

Top Contributors in the Community