View Only
last person joined: 2 days ago 

Ask questions and share experiences about ACX Series, CTP Series, MX Series, PTX Series, SSR Series, JRR Series, and all things routing, including portfolios and protocols.

If you have a question or a use case, likely there are others who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge! Post here or in the vMX community. 

Need additional guidance?  Check out these Juniper Resources.

Documentation Technical Bulletins Knowledge Base Day One Books

Latest Discussion Posts

  • I assume that is the gateway ip address you are researching. The result is showing that the only route to is the default route. Which indicates that is NOT directly connected. If it were then the interface ...

  • Hello, Can someone post a basic configuration for route leaking between two VRFs using communities? I can't seem to quite get the logic right.

  • Sorry for not being clear. Yes, this is supported in Junos by using the bandwidth statement on the path as I mentioned. You make this choice by configuring the bandwidth at the path level. For example, when you assign the same bandwidth for the primary ...

  • Thanks @spuluka ! I didn't explain well, actually I want to know about bypass LSP on auto-bandwidth scenario. In auto-bandwidth scenario the bandwidth of bypass LSPs is 0, because of that, there isn't bandwidth reservation of bypass LSP and there's ...

  • The source of the bandwidth request to RSVP will be the path configuration for the LSP. You choose the level of bandwidth request which can be the same for different for the primary and backup path. RSVP will then calculate the primary and backup path ...

  • Hello guys! I've worked with RSVP-TE on Juniper devices and I know that devices support link protecion with aditional node protection, but I didn't find out anything about aditional bandwidth protection (Bandwidth protection desired: 0x08) as described ...

  • Profile Picture

    Query on default and static route behaviour

    This message was posted by a user wishing to remain anonymous Team, gateway device connected to Juniper device ( not sure directly or not), however i have IP of gateway device. I would like to understand below CLI output to know the connectivity. ...


  • AI-Driven Support via JSI

    Get AI-driven support by connecting your devices to Juniper Support Insights (JSI). Join one of our upcoming “Jumpstart JSI Ask the Experts” meetups to learn more about JSI and ask the panel of experts your questions. Select the session that best suits your schedule:

    Tuesday, June 25 from 8:00-8:45PM PT: Register Now
    Wednesday, June 26 from 8:00-8:45AM PT: Register Now

Unanswered Posts

Top Contributors in the Community