View Only
last person joined: 5 hours ago 

Ask questions and share experiences about ACX Series, CTP Series, MX Series, PTX Series, SSR Series, JRR Series, and all things routing, including portfolios and protocols.

If you have a question or a use case, likely there are others who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge! Post here or in the vMX community. 

Need additional guidance?  Check out these Juniper Resources.

Documentation Technical Bulletins Knowledge Base Day One Books

Latest Discussion Posts

  • Hello Bob, For that alarm we have this KB, if you get the alarm port restart the fpc, please open a JTAC case

  • Hello Experts , I am working on a Production Data center where i need to analyze the inbound and outbound traffic of mx10003. I am planning to connect my mx10003 router to an HP server (dl360 genX) model . Can you please help me on my below question. ...

  • Profile Picture

    RE: MX vx PTX

    Hey Chuck, In my experience the differences are mainly in features and scale so it very much depends on which features you'd want to use and what type of route scale you want to use. I dont have any numbers ready off the top of my head, but as far ...

  • Hi ! I'm currently studding for Junos service provider exam. I'm using V-LAB to experiment my reading. In order to teste my knowledge I use topology "BGP - Multi-AS with Dual Route Reflectors" in V-LABs. I load factory-default configuration ...

  • You may use a third VRF dedicated to such static routes. VRF-special containing one route X next instance VRF A, and another router Y next instance VRF B. VRF B imports the first one, VRF A imports the second one (always using auto-export). I did ...

  • Hi, Regarding why appears in show route ospf , but not show ospf database - well, actually, it is in OSPF database, but as LSA 1. See, making interface passive in OSPF prevents OSPF from sending hello packets, but OSPF will include this ...

  • Hi, let me explain a bit better the scenario. We are migrating an MPLS network based on a vendor different from Juniper, to MX960. The network is composed of about 40 PEs with around 50 VRFs. In the current situation we have a huge amount of leaking ...


Unanswered Posts

  • 1 person recommends this.

Top Contributors in the Community