Routing

Hi, Regarding why 11.1.1.0/24 appears in show route ospf , but not show ospf database - well, actually, it is in OSPF database, but as LSA 1. See, making interface passive in OSPF prevents OSPF from sending hello packets, but OSPF will include this ...

Hi, let me explain a bit better the scenario. We are migrating an MPLS network based on a vendor different from Juniper, to MX960. The network is composed of about 40 PEs with around 50 VRFs. In the current situation we have a huge amount of leaking ...

By «distribute to remote PE», you mean advertise VRF routes in i-MP-BGP, right? So you have to export the route from the exporting VRF (let's say A), not from the importing VFR (let's say B). So make provisions to export the routes toward remote PE ...

Good morning everyone, I wanted to reach out to folks in the community and discuss something that I can't really seem to get a straight answer on. Aside from the major difference in prices, what are the limitations/advantages of the PTX and MX 10K ...

I am starting out with ospf and have the below topo: R0 (ge-0/0/0 11.1.1.1)--- (ge-0/0/0 11.1.1.2)R1 (ge-0/0/1 192.168.10.1) ---- (ge-0/0/1 192.168.10.2)R2 lo0 1.1.1.1 ...

Could you share the policy options for the BGP? BR ------------------------------ DANIEL TRAN ------------------------------

Hi Daniel, yes, the usage of auto-export allows to have imported routes of VRF_A appearing in the routing table of VRF_B, but then when I try to export them into BGP to make them available also for remote PEs, it doesn't work. BR ------------------------------ ...