Routing

I also having the output on both ACX7100 and QFX5120. ACX glitch apstra@ACX7100-32C-BD-LEAF1> show interfaces et-0/0/4.200 extensive Logical interface et-0/0/4.200 (Index 1039) (SNMP ifIndex 596) (Generation 627065226570) Flags: Up SNMP-Traps ...

Hello. I have a lab test scenario that the original purpose is about to bridging the q-in-q at double vlans through VXLAN. I have two topologies that will have to show you. ## --- First topology. --- Basically we have 2 QFX5120s as leaf switches, ...

The provide-tunnel I used is pim-asm For each vrf mvpn, a pair of mt- interfaces are automatically created as follows: root@PE-1# run show pim interfaces instance demo Name Stat Mode IP V State NbrCnt JoinCnt(sg/*g) DR address lo0.4 ...

hi guys. in our company we have a MPLS backbone with 70 nodes ( MX 204, MX 10003 and 10008) router. We are currently usin 4 MX 10003 routers as a root reflector cluster. No, we want so secure the ruster to make it Now we want to secure the cluster ...

Hello Steve, thank you for responding to my post. I actually checked the that before, but dual stack was not listed in the supported feature. I would like to know if PTX10002-60C is capable to run both IPv4 and IPv6 to the same physical or logical interface. ...

All the Junos platforms support ipv6, but there are differences in the details and Junos versions required. You can use the Juniper Feature Explorer site to confirm what features are supported. From this link > Select your platform > then the Junos ...

We are planning to replace our core routers from MX480 to PX100002-60C to expand the 100G port density. One of the requirements we have in our network is a support of dual stack for ipv4 and ipv6 addresses. My question is, do PTX10002-60C support dual ...