Routing

 View Only
last person joined: 18 hours ago 

Ask questions and share experiences about ACX Series, CTP Series, MX Series, PTX Series, SSR Series, JRR Series, and all things routing, including portfolios and protocols.

If you have a question or a use case, likely there are others who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge! Post here or in the vMX community. 

Need additional guidance?  Check out these Juniper Resources.

Technical Bulletins Knowledge BaseDay One+

Latest Discussion Posts

  • Profile Picture

    RE: GNS3 QFX OSPF Adjacency not forming

    By: aaron.gould , an hour ago

    Hi, can 10.10.10.1 ping 10.10.10.2? If not, check these things... Make sure you are connecting the vQFX PFE (vFP) and RE (vCP) using the em1 interfaces on both pfe and re Check "show chassis fpc" and you should see slot 0 Online/Testing ...

  • Profile Picture

    GNS3 QFX OSPF Adjacency not forming

    By: Jason-net , 17 hours ago

    I am using GNS3. I have 2 QFX devices configured for OSPF. I see their hello packets to each other on wireshark but the 2 QFX devices don't see each other it seems. They both show 0 received hello packets. Can you take a look at my configs and tell ...

  • Profile Picture

    Subscriber service-profile is not created for some ...

    By: PreArt , 2 days ago

    Juniper MX-960 (21.2R3.8) Subscriber service-profile is not created for some speed values (with radius authorization) Same when trying to change/add profile from CLI For example > request network-access aaa subscriber add service-profile "svc-global-ipoe(307200000,307200000)" ...

  • Profile Picture

    Static multicast flooding

    By: Erik Slagter , 3 days ago

    Hi there, Suppose I have a switch (EX3300 in this case) with both routed interfaces (ge-X/X/X.0 family inet, ip address set) and L3 vlan interfaces (vlan.X family inet, address set). I have some "site scoped" multicast traffic (so it's not link scoped, ...

  • Profile Picture

    MS-MPC-128G

    By: Imad BOUILGHMANE , 4 days ago

    Hello, Recently, we have encountered an issue with the FPC 4 MS-MPC-128G on the Juniper MX960 router. This card is hanging lately and after restarting the card everything is fine, We are unable to locate the source of this problem and would like ...

  • Profile Picture

    RE: Dual Stack implementation on Juniper Network D ...

    By: MOHAMAMD AYASH , 4 days ago

    Thank you Olivier again. I will test this out for sure! You've been amazing, glad I found someone that can help. ------------------------------ MOHAMAMD AYASH ------------------------------

  • Profile Picture

    RE: MS-MPC-128G hang on MX960

    By: aaron.gould , 4 days ago

    what do you mean by "hanging" ? are any of the (4) pics going down ? are you seeing CPU zone change into YELLOW or RED? how are you restarting the card? physically pulling it out? or "request chassis fpc slot# offline | online | restart" ...

Announcements

  • Join the Innovators Circle

    If you’re a Juniper customer/partner, you’re eligible to be a part of the Innovators Circle (IC).  Hundreds of IC members have participated in research studies conducted by Juniper’s decision-makers. Their feedback has made key business impacts in product development, branding, engineering, technical documentation, and more. 

    But don’t just take it from me, hear straight from your peers about their IC experience.

Unanswered Posts

  • Subscriber service-profile is not created for some ...

  • Static multicast flooding

  • MS-MPC-128G

  • Alarms generated by MPC4E-3D-32XGE-SFPP, need advi ...

  • Router advertise route with LP of 4294967294

  • source based routing (without firewall filter)?

  • IPSEC DOCUMENTATION BETWEEN SRX5800 AND CISCO CSR ...

Top Contributors in the Community