View Only
last person joined: 22 hours ago 

Ask questions and share experiences about ACX Series, CTP Series, MX Series, PTX Series, SSR Series, JRR Series, and all things routing, including portfolios and protocols.

If you have a question or a use case, likely there are others who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge! Post here or in the vMX community. 

Need additional guidance?  Check out these Juniper Resources.

Technical Bulletins Knowledge BaseDay One+

Latest Discussion Posts

  • You are correct that coloring would not help in the above layout. Your other option is to use is loose or strict hop ip address designating r3 followed by r1 for the specific path desired. ------------------------------ Steve Puluka BSEET - Juniper ...

  • This message was posted by a user wishing to remain anonymous Hi Experts, Given the above coloring, I would like to configure a color LSP between R5 and R2 and want the LSP to take the path R5-R3-R1-R2. I can't come up with any color include any ...

  • Hello Elvin, Thanks for the response . I don't have JTAC support at the moment . Is there no other suggested command that can issue ? Rather to force restart the fpc card ? ------------------------------ olalekan ajayi ----------------------------- ...

  • If you already did OIR, in that case better to check with JTAC for RMA. Elvin ------------------------------ [Phone] ------------------------------

  • The details will depend on how the spine is constructed. If the gateway is on the MX and the spine is straight layer 2 connection that it is simply the vlan connection on the spine link coming up to the layer 3 gateway interface on the MX being assigned ...

  • As these are all on the same Spine, how do we ensure the correct systems are routing back to the correct ISP? ------------------------------ SETH STANFILL ------------------------------

  • I need a support on my srx5800 model FW, Initially I have an alarm in my redundancy firewall on secondary node 1, with an FPC 8 Major alarm. We did JOJI on the card as to see if the alarm will clear, the alarm did clear after the Jack out Jack ...


  • Join the Innovators Circle

    If you’re a Juniper customer/partner, you’re eligible to be a part of the Innovators Circle (IC).  Hundreds of IC members have participated in research studies conducted by Juniper’s decision-makers. Their feedback has made key business impacts in product development, branding, engineering, technical documentation, and more. 

    But don’t just take it from me, hear straight from your peers about their IC experience.

Unanswered Posts

Top Contributors in the Community